Street transport mode stopped working
#1
Street transport mode stopped working
I'm doing some extensive work on my street and I noticed that once I reassembled the forks and the ignition barrel, the transport mode on my bike stopped working. ON the street you turn into ignition, then off and withing 3 seconds you press the odo button. Well, it work fine before, now since a few weeks back nothing happens and the alarm arms, OR even more weirdly the odo displays a message that transport mode is active, but it still arms the alarm as if nothing happened.
Has anyone come across this issue?
I'm thinking:
a) the extended period of the bike being in transport mode as I worked on it confused the ECM.
b) The bike has not been turned on for a while and once the engine is started and runs for a while, the ECM will sort itself out
c) I have a 3d printer running within 5 metres of the bike..could it be interference?
But honestly, its so bizarre, any help will be appreciated!
Has anyone come across this issue?
I'm thinking:
a) the extended period of the bike being in transport mode as I worked on it confused the ECM.
b) The bike has not been turned on for a while and once the engine is started and runs for a while, the ECM will sort itself out
c) I have a 3d printer running within 5 metres of the bike..could it be interference?
But honestly, its so bizarre, any help will be appreciated!
Thread
Thread Starter
Forum
Replies
Last Post
Harley Nutz
Ignition/Tuner/ECM/Fuel Injection
1
08-05-2013 03:55 PM