Hi there guys, I often read the threads, but I rarely post something!

Here is my question : It's been a couple time I've noticed that people telling that you can put a Front Ducati sprocket to convert the street family to chain drive. I would like to know which ducati model do I have to order.

As far as I know, it seems like there is a Ducati that has the same spline as the harley-davidson street family.

Thank you and keep on rockin

 

yeah let me know please if you find somethin im also tryin to find some custom sprockets either belt or chain drive for my 500 to get some more top end seems the 14 spline front sprocket needs a broach to make a custom larger one and the rear i dont wanna mess with cause its got the bearings and the "isolators" alredy in there .. i already got one of each for a sample... as far as the belt drive is concerned ... somebodies gotta have em , though cause the race teams got em on their bikes chain drives i mean i know ive wrote to five places at least and no luck yet i just dont wanna overrev this thing if i hafta get on the interstate thanks

 

Didn't see your answer! sorry about that. for our project bike we installed two 19 inch wheel.
for the front sprocket we used a ducati countershaft sprocket (available at any ducati dealer) and for the rear sprocket we used a farming equipment custom one that we had the center drilled for our spec. hope this helps

 

great! can you tell me where you got the rear sprocket....... and the lateral spacing thanks man good to see somebody else is on board with this

 

As you can see I'm not very active, as I said the rear sprocket comes from a farming equipment dealer, it's just a plain sprocket that you drill for what you need, it was a Case tractor dealer.

 

GS Cycles has a complete kit:

"Kit will initially cost $895-, after that sprocket replacement will cost a fraction of that.

So you get:
-Custom front offset sprocket
-Custom Billet Aluminum Rear Hub to fit Factory Wheel
-Custom Rear Sprocket
-Heavy Duty 530 series O-ring Chain

This kit is completely Bolt-on. Only modification will be the front upper belt guard mount needs to be removed or bent outward to clear chain.

This kit is not on our website yet, so just email us direct if your interested..."

sales@gscycles.com

 

glad to know that i'll be contacting you guys later