xg750A anyone know of compatible after-mkt rear turn signals
Does anyone know of any after-market rear turn signals that are compatible with the XG750A without a load equalizer? I have to replace a broken right rear turn signal and the OEM part is on back order with no delivery date in sight.
Hi Jesse
i fitted some cheap LED ones off ebay.
leave them running for 5 minutes and the ECU will learn the new resistance and then begin to flash them at the proper rate.
Harley says that the replacement part is on back order and will not be available until after Feb. I have looked for a Can/Bus compatible aftermarket signal with no luck. I would rather avoid installing a load equalizer.
I spoke to tech support at Harley. They told me that there is no way of knowing how an after-market device will affect the bike's electrical system. The non-oem signal would void HD's warranty and my service contract -- potentially leaving me with a substantial repair bill and a lot of headaches.
I spoke to tech support at Harley. They told me that there is no way of knowing how an after-market device will affect the bike's electrical system. The non-oem signal would void HD's warranty and my service contract -- potentially leaving me with a substantial repair bill and a lot of headaches.
harley will tell you any old rubbish to stop you working on your own bike.
my 2018 streetrod has cheap “non canbus” indicators and works ok.
We must be lucky here in the uk because we fit all sorts of non harley parts and the warranty still stands.
never took any of my bikes to a dealer - always repair and service my own.
rowle uk
Something like what we did on this 2015 XG500???
We used Custom Dynamics Universal Turn Signal Housings, ProBEAM LED Clusters, and a Triple Play Module to get run, brake, and turn on the turn signals. The Triple Play Module will also strobe the brake lights when the brake is applied before going solid. .
11-30-2018, 02:49 PM
xg750A anyone know of compatible after-mkt rear turn signals
