1995 80cu.in. EVO, ECM compatibility
#1
1995 80cu.in. EVO, ECM compatibility
Hello all,
I had many weeks ago started a thread "stalls when hot" expaining my predicament with a carburetted 1995 EVO Dyna.
Fully stock engine, no mods whatsoever, not even the ubiquitous Stage 1.
I came to replacing the crank position sensor in the nosecone, the coil and even checking the fuel vapor vent in the fuel cap...
I thought I had solved the problem but I evidently didn't, much to my chagrin, because yesterday, in thick, slow traffic, she conked out again.
No power to the plugs - I tested them and no power.
So now I'm looking at replacing the ECU/ECM (ignition module)
My ignition module reads ... ..."32464 - 95 // REV 1340 - 9508"
I have sourced one that reads "32449 - 95a// REV 1340 - 9530"
Are they compatible ? Can I remove one and fit the other ?
Please help, the bike is a good runner provided the weather is cool and I don't sit in traffic too long...
I had many weeks ago started a thread "stalls when hot" expaining my predicament with a carburetted 1995 EVO Dyna.
Fully stock engine, no mods whatsoever, not even the ubiquitous Stage 1.
I came to replacing the crank position sensor in the nosecone, the coil and even checking the fuel vapor vent in the fuel cap...
I thought I had solved the problem but I evidently didn't, much to my chagrin, because yesterday, in thick, slow traffic, she conked out again.
No power to the plugs - I tested them and no power.
So now I'm looking at replacing the ECU/ECM (ignition module)
My ignition module reads ... ..."32464 - 95 // REV 1340 - 9508"
I have sourced one that reads "32449 - 95a// REV 1340 - 9530"
Are they compatible ? Can I remove one and fit the other ?
Please help, the bike is a good runner provided the weather is cool and I don't sit in traffic too long...
#2
#3
#4
I see larsfum on the EVO forum a good bit and I'm there too.
I'm thinking there are some good folks there that could help ya out.
Most times they are a good helpful bunch.
https://www.hdforums.com/forum/evo-classic-models-84/
WP
I'm thinking there are some good folks there that could help ya out.
Most times they are a good helpful bunch.
https://www.hdforums.com/forum/evo-classic-models-84/
WP
#5
WP50 gives good advice about stopping in at the EVO forum. Those guys will steer you right.
#7
Thread
Thread Starter
Forum
Replies
Last Post