Sceaming eagle Protuner Updater issues
#1
Sceaming eagle Protuner Updater issues
So I finally have my my SE Protuner setup on my laptop .
Wanted to do my first install . The software prompted me to do an update . Then update failed here is the screen
So after I was able to connect the VCI and get an update to run and Got this screen
It did finally got run an update in this screen and I did a reboot . But Now I cannot get past the first issue that the software wants an update before It will go forward ..
ANY IDEAS ??/??????
Wanted to do my first install . The software prompted me to do an update . Then update failed here is the screen
So after I was able to connect the VCI and get an update to run and Got this screen
It did finally got run an update in this screen and I did a reboot . But Now I cannot get past the first issue that the software wants an update before It will go forward ..
ANY IDEAS ??/??????
#2
first off, work on your English skills a bit as it is a little difficult to understand you. first off are you using an Apple or PC product for a comuter. Second, your screenshots are not showing on the post so we cant see what you are talking about.
m
if you are using an Apple computer, try it with a non apple product and see what happens.
m
m
if you are using an Apple computer, try it with a non apple product and see what happens.
m
#4
What operating system version do you have on your laptop?
Version 11.x only supports
I can't see your screenshot.
Have you turned off pop up blockers?
Here is a link to the HD Pro Super Tuner download Help file from this page (middle of the page) http://prosupertuner.harley-davidson...uperTuner.aspx
It should download a Help file named - DOWNLOAD_HELP_FILE_en-US.pdf
http://63a1f4f3a10aaa884157-20054cc4...FILE_en-US.pdf
I attached the Help file in case you have problems downloading it.
Version 11.x only supports
- Super Tuner software is approved for Windows 7, Windows 8, Windows 8.1 (32 and 64 bit) and Windows 10 (64 bit) system.
I can't see your screenshot.
Have you turned off pop up blockers?
Here is a link to the HD Pro Super Tuner download Help file from this page (middle of the page) http://prosupertuner.harley-davidson...uperTuner.aspx
It should download a Help file named - DOWNLOAD_HELP_FILE_en-US.pdf
http://63a1f4f3a10aaa884157-20054cc4...FILE_en-US.pdf
I attached the Help file in case you have problems downloading it.
Last edited by shanneba; 11-16-2018 at 04:07 AM.
#7
first off, work on your English skills a bit as it is a little difficult to understand you. first off are you using an Apple or PC product for a comuter. Second, your screenshots are not showing on the post so we cant see what you are talking about.
m
if you are using an Apple computer, try it with a non apple product and see what happens.
m
m
if you are using an Apple computer, try it with a non apple product and see what happens.
m
Last edited by Ron D 33; 11-16-2018 at 10:20 PM.
Trending Topics
#9
#10
Thank to all that reached out . And sorry for the delay in getting back to you all.
I have a PC windows 8 .
Just so everyone know I was able to get things going .
I removed the program using windows uninstall . Then reinstalled .
Now it seems to be working .Good Communications with the PC and the Bike now
I will update in the spring once I start tuning it
Bike is a
2014 Ultra Limited
stage 4 screaming eagle kit just installed
Looking for a 58 mm backing plate any ideas guys?
I have a PC windows 8 .
Just so everyone know I was able to get things going .
I removed the program using windows uninstall . Then reinstalled .
Now it seems to be working .Good Communications with the PC and the Bike now
I will update in the spring once I start tuning it
Bike is a
2014 Ultra Limited
stage 4 screaming eagle kit just installed
Looking for a 58 mm backing plate any ideas guys?