Are all EFIs created equal?
#42
to find out what jets are in your carb you have to remove the floatbowl. remove the bowl, the main jet is in the center(under the brass bolt in the bowl and the pilot/slow jet will be just to the right of that facing the carb. unscrew them and remove and read the numbers printed on them.
m
m
#43
to find out what jets are in your carb you have to remove the floatbowl. remove the bowl, the main jet is in the center(under the brass bolt in the bowl and the pilot/slow jet will be just to the right of that facing the carb. unscrew them and remove and read the numbers printed on them.
m
m
(rationale being: carb is warm, bike starts fine, carb is cold, bike has trouble starting = warm up the carb)
Thread
Thread Starter
Forum
Replies
Last Post
Dejablue
Ignition/Tuner/ECM/Fuel Injection
13
05-10-2013 03:39 PM