Harley Davidson Forums

Harley Davidson Forums (https://www.hdforums.com/forum/)
-   Ignition/Tuner/ECM/Fuel Injection (https://www.hdforums.com/forum/ignition-tuner-ecm-fuel-injection-55/)
-   -   Can't open headlight? (https://www.hdforums.com/forum/ignition-tuner-ecm-fuel-injection/718524-cant-open-headlight.html)

pinchepunk Dec 27, 2011 06:19 PM

Can't open headlight?
 
I purchased an aftermarket headlight that I was told was made for Harley Davidson motorcycles but for the life of me I can't get it open (it didn't come with any wiring).

Below are pictures of the headlight. The only thing that I've been able to do is remove the front out ring and a hex-head pin screw that was embedded into one of the small holes on the bottom (visible in pics). The inner ring around the lens has three circular indentations and I can move it around, although tight, but it doesn't seem to be going anywhere.

Unfortunately, the seller hasn't been able to tell me how to get it open either. I'm hoping someone here has run across the same headlight and can help me out. Below are a bunch of pictures that I hope will help.

Thank you in advance, I really appreciate the help!

- Jean Marc

http://www.rockoleta.com/h001.jpg
http://www.rockoleta.com/h002.jpg
http://www.rockoleta.com/h003.jpg
http://www.rockoleta.com/h004.jpg
http://www.rockoleta.com/h005.jpg
http://www.rockoleta.com/h006.jpg

UltraNutZ Dec 28, 2011 06:44 AM

that front trim ring should unscrew and the lens with the bulb will slide right out.

pinchepunk Dec 28, 2011 11:29 AM


Originally Posted by UltraNutZ (Post 9189354)
that front trim ring should unscrew and the lens with the bulb will slide right out.

I removed the outer ring, there is an inner ring that you see in the pics but no matter how much i turn it doesn't seem to go anywhere.


All times are GMT -5. The time now is 09:25 AM.


© 2026 MH Sub I, LLC dba Internet Brands