Milwaukee Eight (M8) 2017 and up M8 Air and Liquid Cooled discussion
Sponsored by:
Sponsored by:

M8 Stage 5 disassemble and installation

Thread Tools
 
Search this Thread
 
  #1  
Old 02-16-2017, 08:42 PM
George Bryce's Avatar
George Bryce
George Bryce is offline
Cruiser
Thread Starter
Join Date: Nov 2016
Location: Americus Georgia
Posts: 156
Received 206 Likes on 83 Posts
Default M8 Stage 5 disassemble and installation

I have a plan. I am not going to advertise this here.
I am not going to try and sell, to any of you, in this section.
But, I have an idea about how to make the biggest most powerful M8.
I am going to do it. Is it okay if I tell you all about it in this thread?
I am just a bike dude with some good ideas. I am going to do the work and I am going to tell you all about it. Right here, okay. Please do not ask me how you can get some. If you do, I will get my hand slapped again!

FYI, I DID and I PAY to be a vendor on these forums.
But, I am not trying to sell you anything. I am only wanting to share this stuff.
Why? Because folks like me and YOU want to know about this stuff.
Did you folks like the photos and descriptions of my last M8 build? Seems like you do.

I am going to build another M8. I want to share the build on here.
Sound good? If you are a moderator, a sponsor or a builder reading this and you dont want me to share this information, please speak up on here, where we can see you and know who you are.

Thank you. Let me know if you would like to know more.
I will be back soon
 
The following 9 users liked this post by George Bryce:
09 YELLOWBIRD (02-16-2017), BrokenAnchor (02-18-2017), Eccool (02-17-2017), FLTRI17 (02-18-2017), gordy67 (02-18-2017), MTBIG G (02-18-2017), qtrracer (02-18-2017), Rokinrider (02-16-2017), str8shuutr45 (02-18-2017) and 4 others liked this post. (Show less...)
  #2  
Old 02-16-2017, 09:06 PM
UltraZac's Avatar
UltraZac
UltraZac is offline
Tourer
Join Date: Jan 2013
Location: British Columbia, Canada
Posts: 354
Likes: 0
Received 88 Likes on 52 Posts
Default

Oooo K.
 
The following users liked this post:
George Bryce (02-16-2017)
  #3  
Old 02-16-2017, 09:24 PM
kllrvet's Avatar
kllrvet
kllrvet is offline
Cruiser
Join Date: Jan 2017
Location: Cape Coral, Florida
Posts: 107
Received 38 Likes on 20 Posts
Default

George, I think we all look forward to what you have in store....if you aren't welcomed to share, please at least share your progress via Email. Kllrvet92@aol.com

My friend Doobs Nyberg says hi.

Tony
 
The following users liked this post:
George Bryce (02-16-2017)
  #4  
Old 02-16-2017, 09:38 PM
IdahoHacker's Avatar
IdahoHacker
IdahoHacker is offline
Club Member

Join Date: Jul 2014
Location: Idaho
Posts: 11,143
Received 2,953 Likes on 1,685 Posts
Default

Hi George, I'm very interested!

And for a very good reason: I'm going to face a tough decision in two years, whether or not to keep my '15 RGS with the work I've had done to it, or move up to an M8. If I do go to an M8, I will have to decide how much work to do to it. This thread would be very helpful.

Looking forward to your posts!

If it turns out there's a problem with your posting here, please jot down my user name and shoot me a pm when you have some news to share. I'd appreciate it.

(Oh, and btw, Darryl Thatcher says hi! )
 
The following users liked this post:
George Bryce (02-16-2017)
  #5  
Old 02-17-2017, 06:22 AM
WingsMC's Avatar
WingsMC
WingsMC is offline
Intermediate
Join Date: Jun 2016
Location: South Florida
Posts: 31
Received 6 Likes on 5 Posts
Default Thank you

Now go ahead and spill the beans you have our attaintion
 
The following users liked this post:
George Bryce (02-17-2017)
  #6  
Old 02-17-2017, 07:23 AM
GlidingJoe's Avatar
GlidingJoe
GlidingJoe is offline
Outstanding HDF Member
Join Date: Feb 2013
Location: Upper Providence Pa
Posts: 2,321
Received 330 Likes on 251 Posts
Default

If the moderators/vendors and builders don't shut this down, I for one will be following closely. EXTREMELY Interesting learning from another forum member.
 
The following users liked this post:
George Bryce (02-17-2017)
  #7  
Old 02-17-2017, 08:03 AM
jbarr1's Avatar
jbarr1
jbarr1 is offline
Road Master
Join Date: Nov 2015
Location: georgia
Posts: 1,060
Received 278 Likes on 197 Posts
Default

The moderators should certainly allow this. EVERYONE can benefit from what George has to share. George has forgotten more than most of us will ever know--- it's a shame he forgot so much!! That's a joke!!! Keep the info coming George.
 
The following users liked this post:
George Bryce (02-17-2017)
  #8  
Old 02-17-2017, 08:10 AM
Drodrigueznyc's Avatar
Drodrigueznyc
Drodrigueznyc is offline
Tourer
Join Date: Oct 2015
Location: Westchester, NY
Posts: 476
Likes: 0
Received 90 Likes on 74 Posts
Default

enlighten us! I am doing a stage 2 next week.. contemplating on other stages but want to see what you plan on doing before taking the plunge. hit us!
 
The following users liked this post:
George Bryce (02-17-2017)
  #9  
Old 02-17-2017, 09:25 AM
Harttoo's Avatar
Harttoo
Harttoo is offline
Road Master

Join Date: Feb 2014
Location: Wisconsin
Posts: 1,227
Received 153 Likes on 125 Posts
Default

I would very much like to read about Your M8 modifications.
 
The following users liked this post:
George Bryce (02-17-2017)
  #10  
Old 02-17-2017, 09:49 AM
Doshounds's Avatar
Doshounds
Doshounds is offline
Tourer
Join Date: Apr 2014
Location: Houston
Posts: 498
Received 161 Likes on 95 Posts
Default

In for more info!
 
The following users liked this post:
George Bryce (02-17-2017)


Quick Reply: M8 Stage 5 disassemble and installation



All times are GMT -5. The time now is 09:18 PM.