|
Fueling Race oil pump and cam plate - best price
|
Yep that is the best. Hopefully they have them available as single pieces now. I had to go the kit route due to availability, which included the lifters and gaskets.
|
Originally Posted by VDeuce
(Post 17377563)
Yep that is the best. Hopefully they have them available as single pieces now. I had to go the kit route due to availability, which included the lifters and gaskets.
|
Cool, let us know how it turns out. So far mine takes everything I've thrown at it with the 120. Once I get some more miles I will post a thread with the results. For now, I have yet to see anyone post that it has failed to solve the sumping issue.
|
I’ve gotta find an Indy to throw it in for me, but I’ll definitely report back |
Are you going to replace the tappet cuffs with the S&S while in there? Highly recommend them for $45 or so.
https://cimg1.ibsrv.net/gimg/www.hdf...c947045d6b.jpg https://cimg1.ibsrv.net/gimg/www.hdf...a828c94bf9.jpg |
Damn that is a good price. I bought local and ended up paying 1150 with Ca sales tax for the whole kit. Should have shopped around I guess.
|
I bought those too. I think I might get those SE adjustable rockers and throw those in also while its apart.
Originally Posted by VDeuce
(Post 17377773)
Are you going to replace the tappet cuffs with the S&S while in there? Highly recommend them for $45 or so.
https://cimg1.ibsrv.net/gimg/www.hdf...c947045d6b.jpg https://cimg1.ibsrv.net/gimg/www.hdf...a828c94bf9.jpg |
Originally Posted by VDeuce
(Post 17377773)
Are you going to replace the tappet cuffs with the S&S while in there? Highly recommend them for $45 or so.
https://cimg1.ibsrv.net/gimg/www.hdf...c947045d6b.jpg https://cimg1.ibsrv.net/gimg/www.hdf...a828c94bf9.jpg On a side note, the Indy I had finish my cam install (see my missing cam bearing needle thread) was very dishonest. They quoted one price and charged almost 500 more upon completion. I had no choice as they had my bike and could have easily put a mechanics lien on my title. Needless to say I’ll never go back to them. I’m on the lookout for a good Indy around Baltimore Maryland |
Originally Posted by purpledeuce
(Post 17377833)
I had them installed with the RS468, also went with s&s quickees. I should have done the pump and cam plate but I had hoped mine was ok. While I haven’t had any problems I can’t trust the moco. On a side note, the Indy I had finish my cam install (see my missing cam bearing needle thread) was very dishonest. They quoted one price and charged almost 500 more upon completion. I had no choice as they had my bike and could have easily put a mechanics lien on my title. Needless to say I’ll never go back to them. I’m on the lookout for a good Indy around Baltimore Maryland |
| All times are GMT -5. The time now is 03:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands