I did Kury on a ‘15 Street Glide, Vtwingoodies on a ‘18 Ultra Limited and just did a set from DK Custom on the new Triglide. If memory serves, the ones from Kury moves the floorboards out and forward. Vtwingoodies and DK just move them out. For me 1” is about right.
We are the only company who hard black anodizes the front spacers under the powder-coat. This way road chips will not expose bare aluminum.
Be safe.
I am trying to buy the passenger floorboard extension but when I add them using the forum discount in your link it states there is an error with your paypal. Apparently it works when you attempt to buy them without the discount
I am trying to buy the passenger floorboard extension but when I add them using the forum discount in your link it states there is an error with your paypal. Apparently it works when you attempt to buy them without the discount
Ok boss... it's fixed. Thank you for bringing this to my attention.
Tom
Ok boss... it's fixed. Thank you for bringing this to my attention.
Tom
You are welcome. I had went ahead and got them on the regular link. same as the front ones. Hopefully I selected the right one for the 2019 Ultra Limited.
I bought my floorboard extensions from Pro Pad for my 2019 Street Glide Special. They extend the boards 3/4” outboard...it may not sound like much, but it makes a world of difference for comfort. I don’t think you need a full 1 1/4” extension, as I’m pretty sure this would cause clearance problems in a hard lean. I haven’t had any problems with the boards touching the ground with the Pro Pad 3/4” model.
Thought I would follow up on the tall boy cycles floor board mod. Just completed 2500 mile ride with them. They work great and position the floor boards forward and down in the heel. I was looking for highway pegs before and now I don't need them.
Thought I would follow up on the tall boy cycles floor board mod. Just completed 2500 mile ride with them. They work great and position the floor boards forward and down in the heel. I was looking for highway pegs before and now I don't need them.
How are the ergonomics with the foot brake with the floorboards forward and tilted?