FS: Amp and Speakers For Sale
#1
Amp and Speakers For Sale
I have a pair of Polk MM651 6.5" speakers and an Elf E2125XN Two Channel Amp for sale.
This amp is a clone of the Arc 125.2 amp. It is a class D amp and has no FM interference. It is compact and fits easily on top of the OEM HK head unit as well as aftermarket units. It comes with a PAC SNI-35 Line Output Convertor so you can have RCA output jacks to connect to the amp if your using the OEM HD head unit on 2013 down bikes. I've also included the Velcro for securing it to the top of the head unit. The specs are as follows....
80 x 2 @ 4 Ohms
125 x 2 @ 2 Ohms
250 x 1 @ 4 Ohms (Bridged)
Double-Sided PCB Board
Selectable Full/Low Pass Crossover Filters
+15dB Variable Bass Boost
Frequency Response: 10Hz - 50kHz
THD: 0.06%
S/N Ratio: >83dB
Separation: >75dB
High Level Inputs
Independent Gain Control (L/R)
8 Gauge Terminals
Dimensions: 7 in x 5.28 in x 2 in
I put a dab of black silicone on my gain setting to lock it in place, did my best to remove it.
The specs on the speakers are as follows...
Total Frequency Response40-25kHz
Nominal Impedance2.7 ohms
Efficiency94 dB
Power Handling:
Continuous100 watts
Peak200 watts
Recommended Amplifier Power15-125 watts per channel
$150 shipped
This amp is a clone of the Arc 125.2 amp. It is a class D amp and has no FM interference. It is compact and fits easily on top of the OEM HK head unit as well as aftermarket units. It comes with a PAC SNI-35 Line Output Convertor so you can have RCA output jacks to connect to the amp if your using the OEM HD head unit on 2013 down bikes. I've also included the Velcro for securing it to the top of the head unit. The specs are as follows....
80 x 2 @ 4 Ohms
125 x 2 @ 2 Ohms
250 x 1 @ 4 Ohms (Bridged)
Double-Sided PCB Board
Selectable Full/Low Pass Crossover Filters
+15dB Variable Bass Boost
Frequency Response: 10Hz - 50kHz
THD: 0.06%
S/N Ratio: >83dB
Separation: >75dB
High Level Inputs
Independent Gain Control (L/R)
8 Gauge Terminals
Dimensions: 7 in x 5.28 in x 2 in
I put a dab of black silicone on my gain setting to lock it in place, did my best to remove it.
The specs on the speakers are as follows...
Total Frequency Response40-25kHz
Nominal Impedance2.7 ohms
Efficiency94 dB
Power Handling:
Continuous100 watts
Peak200 watts
Recommended Amplifier Power15-125 watts per channel
$150 shipped
#3
#5
#6
#7
Trending Topics
#9