Mark this thread as Unsold
'08 FXCW(C) One Of Custom For Sale - 12995 OBO
#1
'08 FXCW(C) One Of Custom For Sale - 12995 OBO
Bike is located at Zip 75025
I'm the 2nd owner.
Have a clean & clear TX title on hand.
1st owner had put on 3300 miles on the bike and I purchased the motorcycle July 2014.
I have put on 1500 miles on it & counting as I ride to work everyday.
Asking price: 12995$ or OBO.
OBO means, I will consider a decent offer but please don't insult me by giving a low ball offer.
This Rocker is a Neckbreaker. This Rocker was designed to look stunning and to enjoy everyday ride pleasure
List of Mods that has gone into the Custom Rocker: (lost track of the pennies that went into this build)
14" Outlawz ape from Wild1 Chubby
Harley Davidson Inverted Front End
Joker Machine Side Mount Speedo
Dakota Digital Speedo
Longboy Front Fender
Harley Davidson Chin Spoiler
Performance Machine Front & Rear Brake Calipers
Black Widow Baja Contrast Cut wheels with matching pulley & rotor by Colorado Customs
RSD (Roland Sands) levers
Harley Davidson Knurled grips machined by Grip Ace for micro switches
Rivco mirrors with integrated LED blinkers
107" Stage III motor upgrade by GMR Performance
Breakout Oil tank
Arlen Ness Big Sucker intake
Rineheart 2-1 exhaust for power & performance
TTS Tuner
Alloy Art passenger pegs
Heartland Rear conversion with rear Passenger seat included
Heartland rear axle cover
Heartland swingarm mounted License Plate with integrated LED light (acts as running/brake)
Lazer LED lights (acts as running/brake)
Primo Brute IV Open Belt Drive for Primary
Arnott Air Ride Suspension
3" Extended forward control
Custom Pin Striping work by VanDusen (has appeared in TX biker build off)
If you know the parts that I listed out above, then you will have a fair knowledge of how much the parts alone will end up costing let alone labor.
Bike was Blue Stock Color from Harley & when I purchased from the 1st owner.
I stripped down the bike to the frame and powder coated everything all Black. Everything in the bike will be either gloss black or wrinkle black wherever I could lay my hands on.
Shaved the Speedo from the tank console and used Joker Machine Side mount to relocate to the side with Dakota Digital Speedo.
I work for Harley Corporate and i'm a Harley enthusiast, so lot of design and thought went into the bike to make it look this way.
For the tall guys:
I'm 6'2" and the last pic that I attached shows my riding posture
I'm the 2nd owner.
Have a clean & clear TX title on hand.
1st owner had put on 3300 miles on the bike and I purchased the motorcycle July 2014.
I have put on 1500 miles on it & counting as I ride to work everyday.
Asking price: 12995$ or OBO.
OBO means, I will consider a decent offer but please don't insult me by giving a low ball offer.
This Rocker is a Neckbreaker. This Rocker was designed to look stunning and to enjoy everyday ride pleasure
List of Mods that has gone into the Custom Rocker: (lost track of the pennies that went into this build)
14" Outlawz ape from Wild1 Chubby
Harley Davidson Inverted Front End
Joker Machine Side Mount Speedo
Dakota Digital Speedo
Longboy Front Fender
Harley Davidson Chin Spoiler
Performance Machine Front & Rear Brake Calipers
Black Widow Baja Contrast Cut wheels with matching pulley & rotor by Colorado Customs
RSD (Roland Sands) levers
Harley Davidson Knurled grips machined by Grip Ace for micro switches
Rivco mirrors with integrated LED blinkers
107" Stage III motor upgrade by GMR Performance
Breakout Oil tank
Arlen Ness Big Sucker intake
Rineheart 2-1 exhaust for power & performance
TTS Tuner
Alloy Art passenger pegs
Heartland Rear conversion with rear Passenger seat included
Heartland rear axle cover
Heartland swingarm mounted License Plate with integrated LED light (acts as running/brake)
Lazer LED lights (acts as running/brake)
Primo Brute IV Open Belt Drive for Primary
Arnott Air Ride Suspension
3" Extended forward control
Custom Pin Striping work by VanDusen (has appeared in TX biker build off)
If you know the parts that I listed out above, then you will have a fair knowledge of how much the parts alone will end up costing let alone labor.
Bike was Blue Stock Color from Harley & when I purchased from the 1st owner.
I stripped down the bike to the frame and powder coated everything all Black. Everything in the bike will be either gloss black or wrinkle black wherever I could lay my hands on.
Shaved the Speedo from the tank console and used Joker Machine Side mount to relocate to the side with Dakota Digital Speedo.
I work for Harley Corporate and i'm a Harley enthusiast, so lot of design and thought went into the bike to make it look this way.
For the tall guys:
I'm 6'2" and the last pic that I attached shows my riding posture
Last edited by shrini23; 05-24-2017 at 05:57 PM.
#4
jesus, you want to trade a mint under 3k rocker c, modded, breakout custom painted rear fender BADASS, lots of extras, that bike is sick, to bad I didn't see this 9 months ago when I bought mine, thing is beautiful, as luck has it, price is right, bikes perfect, and I'm over here,, LOL, GODBLESS whoever gets that bike....
#5
jesus, you want to trade a mint under 3k rocker c, modded, breakout custom painted rear fender BADASS, lots of extras, that bike is sick, to bad I didn't see this 9 months ago when I bought mine, thing is beautiful, as luck has it, price is right, bikes perfect, and I'm over here,, LOL, GODBLESS whoever gets that bike....
Want to build a bagger.
I don't wanna sell to a dealer or some guys who wants to low ball me. A true Harley enthusiast will understand what went into the motorcycle to appreciate it
#6
man, someone WILL APPRECIATE IT, DAMM, IF I WASNT SO VESTED INTO MINE ID SELL IT, AND TAKE THAT, BEEN THINKING ABOUT IT ALL DAY MAN
The following users liked this post:
shrini23 (05-27-2017)
Trending Topics
#9
Nice looking bike. I can def appreciate all the work you put into it. You could get 15k easily for it if the right person sees it. Someone was gonna buy mine for 13k last week, but I couldn't bare to sell it. Wish you all the best on your sale, it's a sharp,looking bike!
The following users liked this post:
shrini23 (06-04-2017)
#10
Bike is located at Zip 75025
I'm the 2nd owner.
Have a clean & clear TX title on hand.
1st owner had put on 3300 miles on the bike and I purchased the motorcycle July 2014.
I have put on 1500 miles on it & counting as I ride to work everyday.
Asking price: 12995$ or OBO.
OBO means, I will consider a decent offer but please don't insult me by giving a low ball offer.
This Rocker is a Neckbreaker. This Rocker was designed to look stunning and to enjoy everyday ride pleasure
List of Mods that has gone into the Custom Rocker: (lost track of the pennies that went into this build)
14" Outlawz ape from Wild1 Chubby
Harley Davidson Inverted Front End
Joker Machine Side Mount Speedo
Dakota Digital Speedo
Longboy Front Fender
Harley Davidson Chin Spoiler
Performance Machine Front & Rear Brake Calipers
Black Widow Baja Contrast Cut wheels with matching pulley & rotor by Colorado Customs
RSD (Roland Sands) levers
Harley Davidson Knurled grips machined by Grip Ace for micro switches
Rivco mirrors with integrated LED blinkers
107" Stage III motor upgrade by GMR Performance
Breakout Oil tank
Arlen Ness Big Sucker intake
Rineheart 2-1 exhaust for power & performance
TTS Tuner
Alloy Art passenger pegs
Heartland Rear conversion with rear Passenger seat included
Heartland rear axle cover
Heartland swingarm mounted License Plate with integrated LED light (acts as running/brake)
Lazer LED lights (acts as running/brake)
Primo Brute IV Open Belt Drive for Primary
Arnott Air Ride Suspension
3" Extended forward control
Custom Pin Striping work by VanDusen (has appeared in TX biker build off)
If you know the parts that I listed out above, then you will have a fair knowledge of how much the parts alone will end up costing let alone labor.
Bike was Blue Stock Color from Harley & when I purchased from the 1st owner.
I stripped down the bike to the frame and powder coated everything all Black. Everything in the bike will be either gloss black or wrinkle black wherever I could lay my hands on.
Shaved the Speedo from the tank console and used Joker Machine Side mount to relocate to the side with Dakota Digital Speedo.
I work for Harley Corporate and i'm a Harley enthusiast, so lot of design and thought went into the bike to make it look this way.
For the tall guys:
I'm 6'2" and the last pic that I attached shows my riding posture
I'm the 2nd owner.
Have a clean & clear TX title on hand.
1st owner had put on 3300 miles on the bike and I purchased the motorcycle July 2014.
I have put on 1500 miles on it & counting as I ride to work everyday.
Asking price: 12995$ or OBO.
OBO means, I will consider a decent offer but please don't insult me by giving a low ball offer.
This Rocker is a Neckbreaker. This Rocker was designed to look stunning and to enjoy everyday ride pleasure
List of Mods that has gone into the Custom Rocker: (lost track of the pennies that went into this build)
14" Outlawz ape from Wild1 Chubby
Harley Davidson Inverted Front End
Joker Machine Side Mount Speedo
Dakota Digital Speedo
Longboy Front Fender
Harley Davidson Chin Spoiler
Performance Machine Front & Rear Brake Calipers
Black Widow Baja Contrast Cut wheels with matching pulley & rotor by Colorado Customs
RSD (Roland Sands) levers
Harley Davidson Knurled grips machined by Grip Ace for micro switches
Rivco mirrors with integrated LED blinkers
107" Stage III motor upgrade by GMR Performance
Breakout Oil tank
Arlen Ness Big Sucker intake
Rineheart 2-1 exhaust for power & performance
TTS Tuner
Alloy Art passenger pegs
Heartland Rear conversion with rear Passenger seat included
Heartland rear axle cover
Heartland swingarm mounted License Plate with integrated LED light (acts as running/brake)
Lazer LED lights (acts as running/brake)
Primo Brute IV Open Belt Drive for Primary
Arnott Air Ride Suspension
3" Extended forward control
Custom Pin Striping work by VanDusen (has appeared in TX biker build off)
If you know the parts that I listed out above, then you will have a fair knowledge of how much the parts alone will end up costing let alone labor.
Bike was Blue Stock Color from Harley & when I purchased from the 1st owner.
I stripped down the bike to the frame and powder coated everything all Black. Everything in the bike will be either gloss black or wrinkle black wherever I could lay my hands on.
Shaved the Speedo from the tank console and used Joker Machine Side mount to relocate to the side with Dakota Digital Speedo.
I work for Harley Corporate and i'm a Harley enthusiast, so lot of design and thought went into the bike to make it look this way.
For the tall guys:
I'm 6'2" and the last pic that I attached shows my riding posture
If you ever wanna try another rocker, w/breakout rear, and plenty of parts as well,>LOL..this is the beginning of my build under 3k miles
Custom painted Breakout rear fender