Mark this thread as Unsold
Custom Build - Road King
#1
Custom Build - Road King
Selling for a computed challenged friend of mine. You can also search Custom Road King on craigslist Minneapolis to contact him directly.
One owner, purchased bike in 1994 - Professionally Customized in 2010. Bike has been lowered 1 inch front and rear. Mechanically perfect, new fork seals in May 2019.
Motor:
80 c.i. Evolution - Estimated 100 hp + or - never dyno tuned. Heads - ported, polished and shaved 90 thou
Andrews cam, Hi compression pistons, Performance ignition, Hooker Header, Wimmer Intake, Barnett clutch, cylinder jugs diamond cut
Professionally painted by by Tom Rad in Minneapolis, look him up.
Pearl white / vivid black two tone with red and neutral pinstripe. 1961 tank emblem
Wheels:
Ride Wright Fat Daddy Black 50 (tubeless) - Tires Metzler Marathon 880
Front: 21 x 3.5 - Rear: 18 x 3.5
Front fender:
Russ Wernimont
Seat:
1 off Donnie Smith custom 2018
Brakes:
Front - full floating rotor with one 6 piston Jay Brake Caliper.
Rear - polished rotor, stock caliper
Handlebar and Controls:
16 inch Buffalo bars 1 1/2 inch diameter
Screaming Eagle V Rod chrome controls. Hydraulic clutch conversion
Internal throttle, clutch and electrical. EVERYTHING BURIED
This bike goes as well as it shows. Professionally built, all quality parts
$14500 OBO
One owner, purchased bike in 1994 - Professionally Customized in 2010. Bike has been lowered 1 inch front and rear. Mechanically perfect, new fork seals in May 2019.
Motor:
80 c.i. Evolution - Estimated 100 hp + or - never dyno tuned. Heads - ported, polished and shaved 90 thou
Andrews cam, Hi compression pistons, Performance ignition, Hooker Header, Wimmer Intake, Barnett clutch, cylinder jugs diamond cut
Professionally painted by by Tom Rad in Minneapolis, look him up.
Pearl white / vivid black two tone with red and neutral pinstripe. 1961 tank emblem
Wheels:
Ride Wright Fat Daddy Black 50 (tubeless) - Tires Metzler Marathon 880
Front: 21 x 3.5 - Rear: 18 x 3.5
Front fender:
Russ Wernimont
Seat:
1 off Donnie Smith custom 2018
Brakes:
Front - full floating rotor with one 6 piston Jay Brake Caliper.
Rear - polished rotor, stock caliper
Handlebar and Controls:
16 inch Buffalo bars 1 1/2 inch diameter
Screaming Eagle V Rod chrome controls. Hydraulic clutch conversion
Internal throttle, clutch and electrical. EVERYTHING BURIED
This bike goes as well as it shows. Professionally built, all quality parts
$14500 OBO
Last edited by ElectraLarry; 05-24-2019 at 04:32 PM.
#2
That is a BEAUTIFUL Bike tastefully done, but you or he will be hard pressed to see that kind of cabbage for it. I am not slamming on your post or anything, the market is just Horrible. Again that is a Beautiful Bike. Best of Luck with sale
Thread
Thread Starter
Forum
Replies
Last Post
adamsrotors
Motorcycles For Sale
4
08-01-2019 12:58 PM