I just bought a tour pack off a 2011 ultra. It comes with the speakers/speaker pods and wrap around back rest. I was wondering is there anything about the intercom and speaker wiring i need to consider from the 2011 to the 2014

 

Here's a couple schematics of 2014 bikes with and without.

 

If you are adding this to your Street Glide then I do believe you need the wire harness for it.

 

I just installed a 15 tour Pac from a salvage bike to a 15 RG standard. The wiring for the speakers are mixed into the wiring harness and was too complicated to remove. My wrench was able to purchase the appropriate fittings and connections and made a wiring harness that worked. We still haven't gotten the rear volume control to work.

 

https://serviceinfo.harley-davidson....t/view?id=5538#


This should get you the 2011 wiring diagrams

 

Maybe they make a harness to plug in Connector 280A for the intercom? You have the speaker wires at Conn. 162A.
Saw this for the rider:
http://www.harley-davidson.com/store...-comm-kit#tabs

 

Thanks for all the input the schematic is a lot of help. The tour pack hasn't arrived yet so stay tuned

 

It did get me a copy of the diagram but when printed is unreadable. Does anyone else have some where to get that print

 

After doing a little studding of the schematics. I see on fig b-17 there is a speaker pod switch that appears to apply power to pin B2 (Rear switch audio) at the radio. I was wondering if any one new if that had to have power to it to enable the rear speaker out, or is it just a place to turn it off if you don't want them play for some reason?

 

If you have Google Chrome, open the link with Google Chrome. On the top right there should be a 'Print Icon'. If you click on that then there is an option to save as a PDF file. Save the file as a pdf file and try printing from it. Hope that works.