Thanks a bunch, I went by Lowes and picked up a couple 1 1/2" bolts and a couple spacers, I already have it made. Works great, I already have black bars, black cup holder, and controls so I'll just paint it to match. The best part is I'm only out a couple bucks.

 

I used a Barefoot ******* holder on trips to Sturgis and another during another trip to Yellowstone. It has a lot of adjustment to it, worked great and was cheap.

http://www.barefootwillies.com/

Good luck.

 

http://www.cruisercustomizing.com/ku...s/part/KY-1689

You can try this one. One warning do not use the factory 2014 Harley cup holder. I attached one to my older bike and it leaked fluids all over my garage floor.

 

Give us a look as we do make several styles http://shop.captain-itch.com/Leather...-Holder_c2.htm

 

Here's another option for those who like nice-looking accessories. The Roadrunner has 6 different angle options but then "locks" into place. You can mount to a bar (handle, crash, etc), brake/clutch, even windshield. You're bound to find a good location and angle. You can pick the travel mug (insulated, no-spill) or an insert that accommodates water bottles and such (or both). All the hardware is US made of aluminum then chromed or anodized (black). http://www.leadermotorcycle.com/CTGY/drink.html

 

I'm going to go with the RAM one off the left controls. I already have half the mount since I was using it with the X clamp on the last bike to hold my phone so I could use the GPS.

 

I'm using the RAM on the left,but wondering if Kuryakyn is going to make the passenger one for the '14 like I had on my '11. It attached to the Tour Pak.

 

I'm hoping Rivco will develop a model of their rear cup holder for the 14s. I had one on my 12 and the wife really liked it. And when it wasn't in use, it folded out of the way and was hidden.
jt

 

A second vote here, as well.

I've got lots of Capt. Itch's stuff... his leather is second to none...


...and his wife ain't bad either.

 

+1
I tried the Cruiser Kaddy the dealer sells and it rusted out at the key way section withing 4 months. It was replaced under warranty so I gave it to another riding bud, he took it off after a day. That was back in '09. Since then I've used Barefoot ******* cup holder. It's lasted through 3 different Harley's and 1 Goldwing so far.

I also use a 20 oz bicycle bottle with one of those free promotional coozies we're always getting. Slide over the bottom of this plastic bottle for insulation. Fits perfectly in the Barefoot Willie cup holder.