Can anyone provide a diagram, or describe to me where/how the stock rear brake light switch mounts on my 1950 Panhead with MECHANICAL brakes? I can't find any pics of any 50 Pan's with enough detail to show me how/where it mounts. I got the part figured out for the attachment to the rod coming off of the brake pedal, but can't figure out where to put the actual switch.
I have upgraded to a RevTech oil pump and the body of that pump is quite a bit thicker than the stock unit and if the switch mounts where I think it's supposed to mount then it isn't going to work with the RevTech pump because there just isn't enough clearance between the pump and what I think is the mounting hole on the brake crossover tube.
ANY drawing, or description would be helpful.

Thanks,
Jeff

 

Jeff Did you die ? Do you still want to see how that sending unit mounts to the pan frame Let me know

 

Nope... didn't die. Still wondering if anyone has a diagram of how the stock switch mounted. If ya got one, or a picture please let me know at rancherojef@yahoo.com.

Thanks, Jeff

 

pic of right side of a 49 pan sent to your email. If you have a set up that allows you to zoom in, you can see the detail. Switch mounts off a tab on the crossover tube, connects with a small arm, and springs attached to the brake pedal.

 

Could you send me that picture also? heathhamlin@hotmail.com Thank you

 

Pics sent to the email above

Dave

 

Could I get you to send me a pic also Working on a 49 Thanks

 

 

Thanks Panz for pix I guess mine not being stock is why I was having trouble locating it

 

​​ hello I'm looking for the picture of the rear mechanical brake switch mount on my pan anyone who can help I appreciate it thanks guys