Hi, my clutch is grabing at almost the end of the andle gripe, what do I have to do, adjust the clutch cable or the clutch it self, thanks.

 

Try adjusting the cable first. Start with the simple and work your way up.

 

yes, , thanks..

 

Your clutch adjustment is way out of wack, do the whole process, clutch and cable.

 

Plus 1 if it's that far out adjust the hole thing from start to finish.

 

There are some good YouTube videos on how to do this. It is pretty simple and takes about 20 minutes for the entire process. Follow the instructions to the letter and you will be fine.

Get a service manual as well to supplement the videos.

Just make sure the bike is cold and not warmed up. Seems this was the only point of note everyone leaves out.