Correct shifter bushing
#1
Correct shifter bushing
Hello everyone,
I have an '05 Roadglide, previous owner removed the heal/toe shifter. Bike has just the toe shifter now. I'm fine with that but I'm concerned that the bushing that goes between the shifter and trans housing is not the correct one. This bushing is very loose on the inner diameter and allows about 1/8" of side to side play in the shifter if I push it in and out of trans housing. Is that the way it is supposed to be??? Can anyone supply me with the correct partnumber.
I'm new to this forum but I sure appreciate all the things I've learned from reading the posts.
Thanks!
I have an '05 Roadglide, previous owner removed the heal/toe shifter. Bike has just the toe shifter now. I'm fine with that but I'm concerned that the bushing that goes between the shifter and trans housing is not the correct one. This bushing is very loose on the inner diameter and allows about 1/8" of side to side play in the shifter if I push it in and out of trans housing. Is that the way it is supposed to be??? Can anyone supply me with the correct partnumber.
I'm new to this forum but I sure appreciate all the things I've learned from reading the posts.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post