Sportster Models 883, 883 Custom, 1200 Custom, 883L, 1200L, 1200S, 1200 Roadster, XR1200, and the Nightster.
Sponsored by:
Sponsored by:

Cvaria's 2007 883 Standard (XLCN): Consolidated Thread of Nonsense (Working)

Thread Tools
 
Search this Thread
 
  #331  
Old 03-09-2017, 01:53 PM
TStephen's Avatar
TStephen
TStephen is offline
Road Warrior
Join Date: Mar 2016
Location: SC
Posts: 1,713
Received 299 Likes on 258 Posts
Default

It also never hurts to have another set of hands.........to hold the jugs.......... while your handling the piston.........I mean......
 
The following users liked this post:
Ratwerke (03-09-2017)
  #332  
Old 03-09-2017, 02:04 PM
cvaria's Avatar
cvaria
cvaria is offline
Supporter
Thread Starter
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,358
Received 2,196 Likes on 1,682 Posts
Default

Must be the weather
 
  #333  
Old 03-09-2017, 02:26 PM
TStephen's Avatar
TStephen
TStephen is offline
Road Warrior
Join Date: Mar 2016
Location: SC
Posts: 1,713
Received 299 Likes on 258 Posts
Default

I haven't ridden since October, I'm going nuts.
 
  #334  
Old 03-09-2017, 03:03 PM
cvaria's Avatar
cvaria
cvaria is offline
Supporter
Thread Starter
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,358
Received 2,196 Likes on 1,682 Posts
Default

Originally Posted by Søren Rix Petersen
are you not changing the worm gear to the buell version???

regards
Sören
ordered from Hammer Dan. The Buell 26391-06 part is back-ordered from hd til the 13th. Why is everything back-ordered?

sending bill to Sören's big mouth.


 

Last edited by cvaria; 03-09-2017 at 03:08 PM.
  #335  
Old 03-09-2017, 07:52 PM
WKNDS's Avatar
WKNDS
WKNDS is offline
Grand HDF Member
Join Date: Nov 2012
Location: Newport,TN area
Posts: 4,100
Received 1,306 Likes on 954 Posts
Default

Originally Posted by cvaria
ordered from Hammer Dan. The Buell 26391-06 part is back-ordered from hd til the 13th. Why is everything back-ordered?

sending bill to Sören's big mouth.


Wow! Is that your original gear on the right ? Why not just use a
brass replacement ? just wondering...

T.
 
  #336  
Old 03-09-2017, 09:07 PM
cvaria's Avatar
cvaria
cvaria is offline
Supporter
Thread Starter
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,358
Received 2,196 Likes on 1,682 Posts
Wink

Originally Posted by WKNDS
Wow! Is that your original gear on the right ? Why not just use a
brass replacement ? just wondering...

T.
lol, not mine. brass/bronze/adamantium ordered from hammer earlier after being assailed by the Danish
 
  #337  
Old 03-09-2017, 09:29 PM
cvaria's Avatar
cvaria
cvaria is offline
Supporter
Thread Starter
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,358
Received 2,196 Likes on 1,682 Posts
Default nonsense

evil rear brake pads showed up:



gnarly material...





flashed stage 4 tune:

 
  #338  
Old 03-09-2017, 09:36 PM
slvrscoobie's Avatar
slvrscoobie
slvrscoobie is offline
Road Master
Join Date: Apr 2016
Location: NJ
Posts: 1,031
Received 141 Likes on 116 Posts
Default


Nice unit
Give me the low down, are those the brake pads better because...
 
  #339  
Old 03-09-2017, 09:55 PM
cvaria's Avatar
cvaria
cvaria is offline
Supporter
Thread Starter
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,358
Received 2,196 Likes on 1,682 Posts
Default crap led install

installed the knock off $60 8690m with stupid integrated turn signals (turns will not be used because "wtf?").

what? https://www.hdforums.com/forum/dyna-...l#post15985145




stock with dk led



wiring mess on the rear of knock off.



clip large spade and replaced with water resitant blade to match the HD LED housing aux power connection



HD LED housing aux power connection



in



on



compared to the real deal 8690a. the knock-off is much brighter, not always a good thing



blah



i noticed that the knock off uses all 4 little d shapes vs the real deal using 2. dunno
$60 bucks.... don't care. will have to see how it plays out on the road... it is just a bit dimmer than the sun that is the custom dynamics trubeam
 
  #340  
Old 03-09-2017, 10:04 PM
cvaria's Avatar
cvaria
cvaria is offline
Supporter
Thread Starter
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,358
Received 2,196 Likes on 1,682 Posts
Default

Originally Posted by slvrscoobie
Nice unit
Give me the low down, are those the brake pads better because...

pv is the business


the gold pads claim 20% more stopping over stock. the ones most folks use, z+ pads, claim 10% .

http://www.lyndallbrakes.com/brakes

 
The following users liked this post:
slvrscoobie (03-09-2017)


Quick Reply: Cvaria's 2007 883 Standard (XLCN): Consolidated Thread of Nonsense (Working)



All times are GMT -5. The time now is 05:11 PM.