what + cables for 14" wild one chubbys
Road Captain
Joined: Mar 2007
Posts: 572
Likes: 6
From:
Downunder - check my post further up in this thread. You'll only lose cruise if you order cables not made for cruise. The only difference being the throttle cable, by the neck of your bike, has a a couple contacts (Roll off sensor) for a plug so that your bike knows to turn off the cruise when you roll the throttle.
DSLWraith - No one can answer your last question without knowing what bars you're getting, and they had put on pretty much the same ones. But, even then, just contact the manufacturer (as I suggested in my original post if you get Wild 1) and get their suggestion.
Thread Starter
|
Advanced
Joined: May 2008
Posts: 80
Likes: 0
i checked with wild one this is what they said:
Brandon,
As far as the wires go, I would add 12-15". You may want to go
taller in the future and it will already be done.
The cables are as follows: +6" on clutch cable and +8" on the brake,
throttle & idle cables.
If you have any further questions please call.
John Pollock
R & D
(714) 536-5869
wild1inc@gte.net
www.wild1inc.com
Brandon,
As far as the wires go, I would add 12-15". You may want to go
taller in the future and it will already be done.
The cables are as follows: +6" on clutch cable and +8" on the brake,
throttle & idle cables.
If you have any further questions please call.
John Pollock
R & D
(714) 536-5869
wild1inc@gte.net
www.wild1inc.com
1st Gear
Joined: Sep 2007
Posts: 5
Likes: 0
07FLHRCMarinePatriot
You are whats make sites like this so worthwhile. Thanks so much for the doco you put up about the bar change, it is exactly what I am after/was needing and it is so relevant to me because it is based upon the exact same bike as mine.
where did you get all your cables from? I have to factor shipping to aus as well
Your help and knowledge will save me up to $500 or so, money I can spend elsewhere ... so again thankyou
You are whats make sites like this so worthwhile. Thanks so much for the doco you put up about the bar change, it is exactly what I am after/was needing and it is so relevant to me because it is based upon the exact same bike as mine.
where did you get all your cables from? I have to factor shipping to aus as well
Your help and knowledge will save me up to $500 or so, money I can spend elsewhere ... so again thankyou
Last edited by rkc_downunder; Sep 4, 2008 at 11:10 PM.
Road Captain
Joined: Mar 2007
Posts: 572
Likes: 6
From:
I got Magnum cables www.magnumshielding.com . All my stuff came from www.mandmcycles.com . But, as I mention in the last page of the "How-to", another contender is http://www.warehousedirec.com/ , particularly for you since they don't charge shipping (well, at least in US).
Like I said in my write-up: M&M charged shipping, but their prices were lower to begin with than Warehouse Direc so it pretty much evened out. Shipping to AUS may be a whole 'nuther story . . .
Cruiser
Joined: Sep 2006
Posts: 237
Likes: 0
From: San Antonio, TX.
Cruiser
Joined: Aug 2007
Posts: 162
Likes: 0
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
Thread
Thread Starter
Forum
Replies
Last Post
