Fork seals for 2004 Roadster
#11
Checked out the stock seals I pulled last week, they are NOK BR2722E, I measure OD at 52.1 mm, h = 11mm, so the SKF low stiction seals very likely would fit...also from what I've read these were used on many 80's Hondas so that is a good sign for compatibility too.
FWIW when I had my forks apart last week the stock seals did not seem to have all that much drag with the springs and dampers out...but some people in the MC and MTB world swear by the SKF seals and say they are well worth the big $$$ for the reduced stiction.
https://www.oemcycle.com/Item/product/900849384
FWIW when I had my forks apart last week the stock seals did not seem to have all that much drag with the springs and dampers out...but some people in the MC and MTB world swear by the SKF seals and say they are well worth the big $$$ for the reduced stiction.
https://www.oemcycle.com/Item/product/900849384
Thread
Thread Starter
Forum
Replies
Last Post