Finished the bar and cruise cntrl install on my Breakout
OMG!
Well I took the bike out for a bit of a test ride to get gas (it took 4.8 gals) and the brakes work good. A tad mushy but I performed a series of panic stops and it stopped very good and it did not throw an ABS light. I have an appt. for Tues. to get the ABS bleed completed and turn on the cruise control.
The bars I installed (from a 2017 Fat Boy S) are the most comfortable I have ever set my mitts on! The riding position is so natural, like sitting at a piano! I could literally ride all day now. It is soooo much easier to control now that my arms are not stretched out!
I also finished installing the riders backrest and rack. I picked up a set of the "Set her Back" side plates from "Bitchin' Seats" http://www.bitchinseatstore.net/Brea...sissymount.htm that moves the passenger back 3-4 inches. My wife loves it, way more comfortable than stock.
I like how uncluttered and clean the lines of the bike are!
We may still do the HOG ride this weekend! We will see
Won't know till next week. I have an appt at my dealership for Tuesday, next week, To get the brakes and ABS bled with the DT and turn on the cruise control.
So +4 on the brake line did it eh? I think Santa is gonna drop off a new set of handlebars and brake line to me for x-mas.
I was curious of this as well. It definitely looks like you have plenty more brake line left than I ended up with on mine. Did your line come with the hard line (lower banjo) already attached??
10-18-2017, 04:13 PM
Finished the bar and cruise cntrl install on my Breakout
