My 2010 48 is idling rough and has a pretty good tick in the topend
#1
07-21-2018, 09:26 AM
Join Date: Jul 2018
Location: salt lake city utah
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#2
07-21-2018, 10:34 AM
Welcome to the forums. You might want to try posting here:
https://www.hdforums.com/forum/gener...-tech-tips-59/
or here
https://www.hdforums.com/forum/sportster-models-10/
if you ever come back.
https://www.hdforums.com/forum/gener...-tech-tips-59/
or here
https://www.hdforums.com/forum/sportster-models-10/
if you ever come back.
#3
07-21-2018, 12:07 PM
Always helps to give more descriptive info. Is it one or both cylinders that are noisy? When does it happen- all the time, at idle, at certain rpms, hot or cold? How many miles, has any work been done recently, any mods like a tuner, exhaust, etc.? No offense, but is there enough oil in the tank?
The following users liked this post:
SPRINGER (07-21-2018)
#4
07-21-2018, 02:29 PM
Top end tick...
Have a look around my website, might be just what you need
John @ Rockout
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
Have a look around my website, might be just what you need
John @ Rockout
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Thread
Thread Starter
Forum
Replies
Last Post