SixDD's 2006 FXDB "Build" Thread
#1
Join Date: Jan 2014
Location: Depends on who wants to know.........and why.
Posts: 8,688
Received 1,901 Likes
on
1,109 Posts
SixDD's 2006 FXDB "Build" Thread
Maybe, if I start a thread it will encourage me to get off my butt and get crankin' on this bike - of course I have medical issues to contend with which causes extreme fatigue and I have to work around that. It's still in the planning stage and my mind changes a lot. I'm not sure at this point exactly how it will turn out, but I enjoy the process. I will keep y'all posted.
Here are four pictures of the bike when I first got it:
To be continued...
Here are four pictures of the bike when I first got it:
To be continued...
Last edited by SixDD; 03-04-2019 at 09:31 AM.
#4
Join Date: Jan 2014
Location: Depends on who wants to know.........and why.
Posts: 8,688
Received 1,901 Likes
on
1,109 Posts
This is how the bike looks as of today. As you can see I have already done a few things. One of the next things that will be done to it is 2008 Wide Glide Triple Trees and WG front wheel will be installed. It will be getting a set of Arlen Ness black modular 10" handlebars - that much is for sure. The rear is lowered with Burly Slammer Shocks. I may lower the front.
I'm toying with the idea of a Rocket Bob's rear fender, wider front rim, different front tire, big brake on front, but that's way down the road if I do it.
I'm toying with the idea of a Rocket Bob's rear fender, wider front rim, different front tire, big brake on front, but that's way down the road if I do it.
#5
Join Date: Jan 2014
Location: Depends on who wants to know.........and why.
Posts: 8,688
Received 1,901 Likes
on
1,109 Posts
I installed the lower triple tree. What do you know, this new thread is working already!
Installed the upper tree, a black Joker Machine stem nut, and a set of black risers. I may install these other diamond shaped risers - have not decided.
Installed the fork tubes (everything is "loose" fit for now). The clear coat was stripped off the fork tubes a while back. I will spend some time polishing them - next.
Installed the upper tree, a black Joker Machine stem nut, and a set of black risers. I may install these other diamond shaped risers - have not decided.
Installed the fork tubes (everything is "loose" fit for now). The clear coat was stripped off the fork tubes a while back. I will spend some time polishing them - next.
Last edited by SixDD; 03-04-2019 at 02:27 PM.
The following users liked this post:
cvaria (06-20-2019)
#6
Join Date: Jan 2014
Location: Depends on who wants to know.........and why.
Posts: 8,688
Received 1,901 Likes
on
1,109 Posts
FYI: these are the handlebars that will be installed on the bike. I think I will love the adjustability of them!
https://www.jpcycles.com/product/561...-ape-handlebar
https://www.jpcycles.com/product/561...-ape-handlebar
Last edited by SixDD; 03-04-2019 at 02:49 PM.
#9
Join Date: Jan 2014
Location: Depends on who wants to know.........and why.
Posts: 8,688
Received 1,901 Likes
on
1,109 Posts
The following users liked this post:
GWC68 (03-04-2019)
#10
Join Date: Jan 2014
Location: Depends on who wants to know.........and why.
Posts: 8,688
Received 1,901 Likes
on
1,109 Posts