Rocker-C Build
4 Attachment(s)
Decided to show my "build-progress", all started in 2009 where I installed a bunch of stuff to replace some of the dreadful HD.
First steps where some chrome upgrades and additions: Grips and pegs Shifter, brake and gear-stick levers for Bullet style Installed the Heartland conversion EZ_R with custom-covered by Danny Gray seat Lowering bolts for the suspension Added their mirrors and indicator lights TD-products license plate holder HD Chin spoiler Chrome belt cover Chrome brake calipers Vance and Hines 2-2 w/Big city queit baffles HD handlebars HD "chrome" control lines Tassels on the break/clutch levers from Capt'n Itch So everything was fine.... (or was it?) Soon the rear suspension was replaced with Shotgun Shocks' airride (what a great improvement, I was lucky my kidneys survived the lowering bolts) and the front was lowered somewhat with progressive springs also added were: A 21" replica front wheel from Paul Yaffe Heartland 21" front fender a chrome 18x8" chrome rear wheel MotoX oil tank So all happy again, right? no... added a new handlebar (local made mini ape) and the front fairing. Also replaced the short rear fender with a longer one from Heartland. But then I saw the engraving on ink83's project and that kicked me off again. So the rocker covers and housings, the cam cover and a few bits came of and are now with Catur in Indonesia for engraving. In the mean time getting the following done: Primo Open Belt drive (side covers with Catur for Engraving) Footboards custom made by TD Products parts to made out of brass: (pegs and grips amongst others) lining some stuff up for copperplating will start adding pictures of stuff as they come back to me! Robert |
Nice Rocker C. I hope when I'm finished with mine that it will look as good as yours. Waiting for my 16 inch Lightning Bar Ape Hangers from BR Bars right now. Will install a 3 inch tank rise as soon as there in.
|
i like the front spoiler
|
VERY,very nice. I like everything you have done to your Rocker.
Both you and Rocker B have created masterpieces |
Originally Posted by CyberDuke
(Post 15773869)
....I hope when I'm finished with mine that it will look as good as yours. Waiting for my 16 inch Lightning Bar Ape Hangers...
|
It looks great so far! What size tank lift did you use?
|
Not a huge fan of the Heartland kit, but it's looking good man. I love seeing Rockers get some love!
|
fairing looks sweet. nice job.
|
Originally Posted by Sarah93003
(Post 15780146)
It looks great so far! What size tank lift did you use?
I used a 2" tank lift. Will have to look up which one... RJ |
2 Attachment(s)
Some parts getting ready (footboards) and the air intake is on the way...
Yay!! Robert |
All times are GMT -5. The time now is 05:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands