2018 fat bob led signals and fender brake light
I just got done taking off the stock signals on my 2018 fat bob and replacing with x-arc led signals. I was going to also install a fender edge brake light but it didn't fit...Does anyone have any suggestions for a fender edge brake light?
I tried something like this and attempted to mod it to make it fit, but the width was too short 7" wide and left too much of a gap on the sides. https://cimg1.ibsrv.net/gimg/www.hdf...f1b88e9045.jpg I see that Harley has one for the wide glide but I can't find specs anywhere as to the width. I'm trying to stay away from those led lighting strips. |
Have you looked at Custom dynamics?
|
Originally Posted by Prot
(Post 16648850)
Have you looked at Custom dynamics?
I may just have to go with the light strip :/ |
Here's one that is 9.25"
http://www.ebay.com/itm/Rear-Under-F...lZnlXq&vxp=mtr |
Cool thanks for the link and the idea. I found a similar one on amazon that I'm having sent overnight (prime). Hopefully it works out..
Have to get some pics up... |
Originally Posted by izzyryder
(Post 16648899)
Cool thanks for the link and the idea. I found a similar one on amazon that I'm having sent overnight (prime). Hopefully it works out..
Have to get some pics up... |
IzzyRyder,
Here is a pict of the box of the HD one I got for my 2016 Wide Glide: https://cimg7.ibsrv.net/gimg/www.hdf...6f8ad435ea.jpg It does NOT have the turn signal function, but is both a running light and a brake light. Measurements are: Edge to edge (flat) 8.75" Edge to edge (along the curved surface) 11.75" |
Originally Posted by izzyryder
(Post 16648575)
I just got done taking off the stock signals on my 2018 fat bob and replacing with x-arc led signals. I was going to also install a fender edge brake light but it didn't fit...Does anyone have any suggestions for a fender edge brake light?
But on the downside we do get the ugly sport bike style licence plate holder that will need to be replaced with a side mount... |
Originally Posted by adm
(Post 16648997)
Huh? That's strange as the International models appear (using the parts finder fiche) to have LED rear run/brake/turn signals fitted as standard.
But on the downside we do get the ugly sport bike style licence plate holder that will need to be replaced with a side mount... I just left my stock side mount plate but made it vertical instead of horizontal. Much better. |
How long will it take the after market world to come up with a truncated, stub-like rear fender for the 2 2018 "fat" bikes from HD? The Fat Bob's rear fender is much better looking than that massive one on the Fat Boy however.
|
All times are GMT -5. The time now is 12:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands