Been searchin around for an extended rear brake lever. Most I have found only move the pedal forward an inch or so over stock (for an 08)... Anyone run across a longer one? I am moving the floorboards out and forward on my CrossBones (thanks Sonar Chris for inspiration) and I would like to find something 2-3" longer than stock...

 

I used the Kuryakyn E-Z Brake, #EZB-4B on my FatBoy. it moved the pedal down and forward about 1 3/4" or so. I did the extended floorboards and Harley Goodies too; all good tips from from Sonar_Chris.

 

You should check out Jokermachine.com or Accutronix.com. I believe both manufactures can be found in the DRAG Book too.

 

First of all thanks for the nice words guys.

I used the HD extended lever and havent had one problem. Put the pedel in a much more user freindly postion. Although, if I had to do it again, I would probably go with the EZ break lever, and get one extended shifter arm for the front.

 

Thanks for the replies
I already ordered an extended shifter from Walters. I will probably order their brake arm too, but I was kinda hoping to find one a bit longer. I've got the Harley Goodies and the HD forward rider pans which are off at the powdercoaters as we speak... Lookin "forward" to installing this stuff!
http://www.waltersworkshop.com/exten...ft-levers.html
http://harleygoodies.com/
http://accessories.harley-davidson.c...t/default.aspx

 

Here's another option......... (link below) I have this along with their extended (forward) floorboards.

http://www.bubbasbrake.com/xcart/pro...cat=251&page=1