heritage riser's
 

i have a heritage 05 with fat boy bars on, and have just ordered a set of deluxe riser's, to lift the bars about 1.5", do you have to take all the tin ware of the front or is it possible to do it with this in situ.

RE: heritage riser's
 

i replaced my risers on 04 fatboy and didn't have to take any of the front tin off. i'd bet your heritage you won't have to either.

bill

RE: heritage riser's
 

I replaced the stock riser's on my wifes Heritage with 2 1/2" pull back risers and did not have to remove anything except the windshield. Did not have to remove any tin.

RE: heritage riser's
 

thanks for that do'es anyone know the size of the socket/spanner please.

RE: heritage riser's
 

3/4 I think. You will need a long extension.

RE: heritage riser's
 

what about cable length?? did all the cables swap ok?

RE: heritage riser's
 

I put pullback risers on my '03 Softail (FatBoy)...

Stock cables worked fine.

http://dogsdoom.com/PI/fatboy-riser-02.jpg

RE: heritage riser's
 

thanks for reply's only waiting for parts to come then will dive in and fix them, cables should be ok, h-d techi, had a look and said they are ok.

RE: heritage riser's
 

Let me know how these work out for you. I have an 01 Heritage with Fat boy bars and I've been looking to make them a little more comfortable

RE: heritage riser's
 

i put risers like oldfenderguy has and i didn't have to change cables or anything bolted right on.

i have a 04 fatboy

bill