Changing out wheels and tires this week
Any tips or tricks I should know about? Or is it pretty straight forward?
Thanks |
RE: Changing out wheels and tires this week
id change the pads if I were you when doing the tires/rims/rotors
inspect them for broken retaining springs or such as well.. fluid levels Just follow the service guide when changing the tires/rims and you should be fine Don't need to loosen the axle adjuster bolts.. leave em where they are if they correct If u haven't had the rear axle out before.. sometimes they can be stuck in there pretty good.. the factory doesn't use enough anti-seize lube on it.. make sure when putting it back in, that you coat it well... Make sure you use a calibrated torque wretch and follow the recommended settings then make sure you take it easy on the new pads/tires for the first 150miles.. |
RE: Changing out wheels and tires this week
Only do it with the bike not running and in the stopped position.Kidding.Just wath which spacer goes where.
|
RE: Changing out wheels and tires this week
Thanks, Not gonna change the pads I only have about 1600 miles on them. Iam replacing the rotors though. Anyone know where to download a service manual for an 08 deluxe?
|
RE: Changing out wheels and tires this week
Nice bike jrocker - what kind of wheels you goin' with?
|
RE: Changing out wheels and tires this week
ORIGINAL: BigMike17 Nice bike jrocker - what kind of wheels you goin' with? I can't wait to see what you picked! Mine looked just like yours before I re-did it over! |
RE: Changing out wheels and tires this week
Thanks. I got 60spoke wheels from black bike. Powdercoated black rim and hub with chrome spokes. 21" front 16" in the rear with whitewalls.It has taken them nearly a month to ship them. Should be here by friday. Was gonna go 18 in the rear but I wanted to show more whitewall. I will post up some pics when I get them on.
|
RE: Changing out wheels and tires this week
as stated before. dont loosen adjusters.anti-sieze axle. something else, (non duel exhaust) if its not already, install the axle from the left side. makes this job much easier the next time.
|
RE: Changing out wheels and tires this week
The biggest snag I hit doing mine was the spacing. Got the front wheel bolted back up and the brake was dragging. Picked up a couple of wheel shims at the dealer and jacked around with them til I got it right. Bolted up the rear and the sprocket draggedon the swingarm. Took it apart took it to a machinist and had .250milledoff the the mounting area and it fit. Use new bolts for the sprocket and brake rotors. I've heard of them breaking after being used a second time.
|
RE: Changing out wheels and tires this week
ORIGINAL: JROCKER Thanks. I got 60spoke wheels from black bike. Powdercoated black rim and hub with chrome spokes. 21" front 16" in the rear with whitewalls.It has taken them nearly a month to ship them. Should be here by friday. Was gonna go 18 in the rear but I wanted to show more whitewall. I will post up some pics when I get them on. |
All times are GMT -5. The time now is 10:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands