Need to find out how to move my handlebars back
Ok guys, I know this is a newbie question but I'm hoping to get some help. I have had my 03 Fatboy for about a month now and have put close to 400 miles on it. I've decided that I need my handlebars to come back about 1 to 2 inches. What is out there to accomplish this and how do I do it?
|
RE: Need to find out how to move my handlebars back
Don't know what is specifically available that will fit your bike but you want to look for a "pull back" riser.
|
RE: Need to find out how to move my handlebars back
You will need to work out what type of bars you want on ya ride to start with.
Then you can look at just putting pullback risers or go for a T-Bar type with Pullback, Other option would be apes that could be pulled closer to you as well. Just have a look around on other peoples bikes and if ya see something you like ask them a question about it. |
RE: Need to find out how to move my handlebars back
I put 4.5 inch pull back risers on, perfect for me. Brings them up 2 inches and back 2 inches.
|
RE: Need to find out how to move my handlebars back
Do you know if you still have the stock bars on it?
|
RE: Need to find out how to move my handlebars back
Thanks for all the information. Yes I do have the stock bars and I actually like the stock bars for now and just want to move them back. The pullback riser sounds like the perfect solution.
|
RE: Need to find out how to move my handlebars back
just added a set of 21/2 incher risers to my fatboy this saturday. just like the ones xaran has for sale. made a big difference................kerry
|
RE: Need to find out how to move my handlebars back
If you're planning on sticking with the stock handlebars/wiring, then a set up 2 up/2 back risers should do the trick for you. I put a set of Drag Specialties 2 up/2 backs on to my Fatty last spring. I only had to change out the stock riser clamp bolts, as the bottom of the DS risers aren't drilled out to allow for the stock bolts to go through. Took me an hour, and cost me under $100. Made it feel like a whole new bike.
|
RE: Need to find out how to move my handlebars back
i have 04 fatboy and put on 4.5 pull back risers from jp cycles. pretty much bolt on with no cable changes needed. i think it cost me close to 50.00 plus shipping. made the ride so much nicer.
bill |
All times are GMT -5. The time now is 12:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands