brake pads?
My wifes 1995 Fatboy needs new front brake pads, I'll probably do the rears also. What do you recommend, or use? I'm leaning towards EBC sintered pads. Thanx.
|
pads
Lyndall pads are excellent and what i run
|
I am curious about this too. I have found that my stock pads on the lo are very temp sensative and the from is screaching a lot at slow speed modulation. Would also like something with a little more "bite".
|
Originally Posted by nikonf8
(Post 8797098)
Lyndall pads are excellent and what i run
|
Ebc
Originally Posted by 2whlr4life
(Post 8797785)
I like/have them in my 2007 RoadGlide. The FatBoy has just the single caliper up front and I'm looking for something less expensive. Specifically, I'd like to hear from someone with EBC's.
|
GrassyAzz!
|
I've been running EBC HH pads for years, starting with my sport bikes and have always been happy with them. Made in USA, BTW.
I have floating rotors on my Road King; they were put on when new and had to be replaced due to wear at 50k (most of this was in rain). I'm fine with that. |
Originally Posted by poppavein
(Post 8798512)
I've been running EBC HH pads for years, starting with my sport bikes and have always been happy with them. Made in USA, BTW.
I have floating rotors on my Road King; they were put on when new and had to be replaced due to wear at 50k (most of this was in rain). I'm fine with that. |
Lyndalls. its all U need to know.
Same $$ as HD stockers, better stopping power, No or very little dust, and last longer... |
All times are GMT -5. The time now is 10:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands