Harley Davidson Forums

Harley Davidson Forums (https://www.hdforums.com/forum/)
-   Softail Models (https://www.hdforums.com/forum/softail-models-7/)
-   -   Feeling like i'm getting screwed. What do you think? (https://www.hdforums.com/forum/softail-models/733144-feeling-like-im-getting-screwed-what-do-you-think.html)

evil apes Feb 13, 2012 09:36 AM

Feeling like i'm getting screwed. What do you think?
 
Got work done at an independent shop. I got Sampson upsweep pipes. Didn't need any type of fuel management on it. Already have one on the bike. Just purchase of the pipes ($750.00) & labor to put them on. I had a fatboy fender that they chopped, widened a few inches, prepped, & painted. Total bill was $1800. And the paint isn't a perfect match. Difficult to tell but it's slightly darker. They're charging me 16 hours labor.

Kojax Feb 13, 2012 09:39 AM

to much money

JY Kelly Feb 13, 2012 09:43 AM

It's called "custom" for a reason, friend.

Branner Feb 13, 2012 09:57 AM

What kind of Samsons? Just checked their website, Legend Series "Renegades" go for $750. As far as the bodywork, that price seems high.

*As others have asked, didn't you get an estimate first?*

Sammy1200N Feb 13, 2012 10:15 AM

Did you get an estimate before hand? How many hours did they quote you before hand? The paint needs to match though regardless of the price. Good luck.

Joker_Hal Feb 13, 2012 10:42 AM

Custom work is never cheap. If they widen the fender a few inches, they probably cut it down the middle front to back and added a strip in the middle, and color matching paint is difficult at best. Unless you get everything painted at the same time, there will be a shade or two difference. Even if you have the paint codes, the sun and time has faded the original paint. I'm not an expert but 16 hours does seem a bit longer than it should take. http://i1153.photobucket.com/albums/...35_Small-1.jpg

evil apes Feb 13, 2012 11:20 AM

Didn't get an estimate because I've used this shop for 10 years & they were always the cheapest around & did good work. I was good friends with the owner & he always treated me well. Well, the owner died & now his wife is making the decisions. The shop is about to close because of the death of the owner. Now the wife is trying to hash out the bills due. I don't remember the name of the Sampson pipes that I got, but I did good with them. They were the black fishtails upsweeps. I think they were listed as $790 but they gave them to me for $750. My argument is the fender.

Phantomryder Feb 13, 2012 11:21 AM

Did you ask for a quote before the work was performed?

evil apes Feb 13, 2012 11:25 AM

Now I don't know how to fight this. I'm sick over this. I was expecting about $1200 or $1300. I guess it's a hard lesson learned. Always get estimates! Thanks for your responses. Keep them coming.

hogdiver96 Feb 13, 2012 11:38 AM


Originally Posted by evil apes (Post 9387224)
Got work done at an independent shop. I got Sampson upsweep pipes. Didn't need any type of fuel management on it. Already have one on the bike. Just purchase of the pipes ($750.00) & labor to put them on. I had a fatboy fender that they chopped, widened a few inches, prepped, & painted. Total bill was $1800. And the paint isn't a perfect match. Difficult to tell but it's slightly darker. They're charging me 16 hours labor.

Bloody cheap compared to our rip off merchants..have a Bud and enjoy your bike


All times are GMT -5. The time now is 02:45 AM.


© 2026 MH Sub I, LLC dba Internet Brands