hi guys just wondering if anyone has put a 21'' front wheel on there rocker as i'm looking at doing so just wondering if there was anything i should no about or is it just as simple as getting a softail 21'' wheel and bolting it in ? any help would be great. cheers

 

https://www.hdforums.com/forum/softa...ork-width.html

 

Contact Rich at www.bitchinseatcompany.com
Top quality products

 

There are a few shops that do 21inch wheels specifically for the rocker.. And the answer is no not just any 21 will bolt up take in consideration the size of the hub, distance from hub to rotor and then spacing from hub to forks.. Now, you can make it work but it takes patience and good measuing to make any 21 fit..

 

Heartland Rocker Replica 21"x2.15" bolts right up.
You can even slot the stock fender's mounting holes for clearance and use it.

It's what I'm running 90/90x21.

 

Paul Yaffe also do a replica of the Rocker wheel in 21", although on mine the chrome came off partially)....

Also it didn't fit with the chromed spacers, so the "original" spacers had to be machined to fit

RJ

 

I'm building a Girder front end for a guy in another state. He has a Rocker C, and wants to run the original front fender. Does anyone have a take off front fender that I can get some mounting dimensions from? Please let me know.

 

i am wanting to put a 21x2.15 DNA fat spoke mammoth on , looks like i might have some fun with bushing ect

 

just got in contact with the blokes at ultima wheels and they tell me i wont get the 21 inch wheel i want without changing my front end over to wideglide front, will this alter the alignment of everything as the front wheel is normally offset on the rocker or wont it matter ?