I have a set of Rush Slip on mufflers. Was on a poker run today and they don't seem to be very loud. You have to get on the throttle to get them to open up volume wise.I tried measuring the baffles using a hole gage (not removing the baffles) and got 1.875 (1 7/8" approximate). (Meaning the inside of the baffle) I guess that would mean they ( the outside of the baffle) are 2" baffles?? A lot of members have said that they feel the 2" baffles are rather loud. These are DEFINITIVELY not that in my opinion. I have also read that going to a 2 1/4" could reduce performance on my 2010 Heritage Classic. I have a stage one a/c and a Power Vision tuner.

I heard several Vance and Hines pipes (straight shots)and really liked the way they sounded. Are they louder than the Rush and are the slip on's any good. Or do I need a complete system??

 

i have the fatboy lo with the slip on mufflers with 2 inch baffle they sound preety good. they set car alarms off lol

 

2" inch Rush baloney cuts. Sound great... and loud.

 

So do you think I might have the 1.75 baffles, mine are not very loud....

 

I run the Rush full Crossover pipes with the 2" baffles and they bark pretty good. They also have set off an alarm or two.

 

my brother has the dyna wide glide he has rush slip on with 1.50 inch baffle they are not lound at all. you might have them

 

we got 2" rush slipons seem loud enough even has some decel pop for extra noise making

 

If they are pretty new give them time. I'm running 1.75" and they have burned out a lot. They have fiberglass packing in them that doesn't really last that long. You could also remove the baffle and take some or all of it out. I'm thinking of repacking mine to get the noise down a little.

 

I have the 1.75's which are just right in loudness for me. According to Rush the larger the diameter the louder & deeper in tone they get.
My nephew has the V&H big radius one his Fat Bob which sound great & look damn cool.

 

I actually have the 2" baffles , pulled them out and cut them in half and rewelded the reducers . They are about 6" in total length but sound great