2014 Iron 883 Ignition toggle switch HELP!
#21
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,344
Received 2,189 Likes
on
1,677 Posts
i'm done with most of my big stuff so im focusing on the keyless conversion. my switch showed up last week. three pronged.
im looking for the same thing. found a few like this...
http://www.jpcycles.com/product/382-165
http://www.custom-motorcycle-parts.c...nition-switch/
i'm also at a loss or wiring. there three wires that must be edited. i'm going to use water-proof blade connectors so i can easily revert to the key dependent stock switch.
i'll also make a harness for the switch like the one here:
https://www.hdforums.com/forum/dyna-...e-up-pics.html
looks like the bike must be put into transport mode to stop the alarm from going ape**** once the maxi-fuse is pulled. i pulled it last week and the bike went bananas.
Last edited by cvaria; 03-01-2016 at 09:26 PM.
#23
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,344
Received 2,189 Likes
on
1,677 Posts
i've got time.... because:
this doesn't work. had to order the drag version
Last edited by cvaria; 03-04-2016 at 06:34 PM.
#24
'I'm doing what I think you're calling the horn mount style. So why is it that
what you show below doesn't work? Just wondering. The switch shown
below looks like what I bought too (but I'm not using the connector)
thanks,
T.
what you show below doesn't work? Just wondering. The switch shown
below looks like what I bought too (but I'm not using the connector)
thanks,
T.
#25
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,344
Received 2,189 Likes
on
1,677 Posts
mid usa version (left, meant for older bikes) drag version ( right, 03-13 p/n 2106-0224)
low quality drag adapter (left, included with switch) high quility HD adapter (right, p/n 72327-03... whopping $2 at dealer )
easier to set up adapter with blade socket
The following users liked this post:
cvaria (03-11-2016)
#27
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,344
Received 2,189 Likes
on
1,677 Posts
#28
China I would imagine... :/
Its from V-Twin Mfg.
http://www.vtwinmfg.com/webapp/wcs/s...102_3305130_-1
hth,
T.
Its from V-Twin Mfg.
http://www.vtwinmfg.com/webapp/wcs/s...102_3305130_-1
hth,
T.
#29
Here's my write-up. I'll open the dash to make some shots, but essentially I got rid of plastic connectors so I could use any switch.
https://www.hdforums.com/forum/dyna-...-mod-done.html
https://www.hdforums.com/forum/dyna-...-mod-done.html
#30
Here's my write-up. I'll open the dash to make some shots, but essentially I got rid of plastic connectors so I could use any switch.
https://www.hdforums.com/forum/dyna-...-mod-done.html
https://www.hdforums.com/forum/dyna-...-mod-done.html
Well thats really great for the Dyna guys, but the Sportsters dont have a dash/console.
Guess thats the whole point (or a big part of) this thread. ie) the mount for the switch.
T.