Sportster Speedometer wiring
#1
Sportster Speedometer wiring
Anyone have a speedometer wiring diagram or pinout for the big plug by the fuel tank on a 96 1200 sportster. The owner before me cut out the stock speedo and tach and I'm trying to wire up a after market one and can't find what wire is what and don't want to short anything out any help would be great thanks. There is about 6 cut wires behind the head light
#2
ignition-orange wire 1
databus-light green/violet tracer 2
battery-brown/grey tracer 5
accessory-orange/white tracer 6
ground-black 7
trip switch--black 8
fuel light-yellow/white tracer 9
trip switch-black 11
That's out of my 2007 manual and for non-tach models (not for 883R & 1200R), the number is the pin number on the factory connector.
databus-light green/violet tracer 2
battery-brown/grey tracer 5
accessory-orange/white tracer 6
ground-black 7
trip switch--black 8
fuel light-yellow/white tracer 9
trip switch-black 11
That's out of my 2007 manual and for non-tach models (not for 883R & 1200R), the number is the pin number on the factory connector.
#3
#5
#6
#7
96 sportster wouldn't have a ecu. It would still have a speed sensor on the trans so do the newer bikes with a ecu but the older bikes the speed sensor runs right to the speedo gauge I think. the newer bikes it goes from the speed sensor to the ecu then from the ecu to the gauge. I'm pretty sure they all use a 3 wire Hall type sensor. Talked to them all they have to say is I need a pin out for my bike but its hard to find a wiring diagram for a 96 on line and I don't have a manual sadly
Trending Topics
#10