Looking to add a tuner to my ride. I have a 2007 XL1200C with cycle shack slip ons and Hammer performance intake. Don't intend on any other mods in future. Emailed Fuel Moto and was asking about the E flash and Micro EFI tuner. They suggested the Power Vision instead as they have had on rare occassions the flash had needed to be sent back and re tweaked. Their words not mine. Any one using the power vision and how do they like it and is it easy to use. Also is it easy to set up and what are the benefits as oppossed to other tuners. Thanks in advance. Also I live in Canada so sending things back and forth to the supplier is a bit of a deal.

 

Power vision is the way to go. No ifs, ands, or buts.

people will say "oh my fp3" blah blah, thundermax blah blah.

Powervision. 2nd best motorcycle related investment ive made.

 

I'll second that!

 

pay up and don't look back, its a great investment.

 

Fuel Moto is the place to buy the Power Vision. Great after sale support.
It is $150 off now, about $400.

I've found the Auto Tune basic with the stock narrow band O2 sensors to work well for me and is easy to use. I like to use the display for a tach, engine temp, and gallons of gas used.

Other options may be better with more modifications.

 

I had a Micro EFI from Fuel Moto on my 07 XL1200C. Went to a power vision and I'm MUCH happier. Spend the cash. WAY easier to "install" (Power vision just plugs in vs. having to run wires/02 sensor bypass etc with the Micro) and the PV has way more helpful info, auto tune etc.

 

Thanks for all the input from the members. Just so I know with the Power Vision that they have on sale at Fuel Moto does that include the auto tune feature? Thanks

 

Power visions have the auto tune option built in.

 

Yes. Auto tune basic is included. Works with your existing sensors. You can upgrade to wide band sensors later and auto tune pro, but the included basic works great.
Bought mine from DK customs, because I like their support.

 

Dyna folks going nuts over PV

https://www.hdforums.com/forum/dyna-...l#post16064485