ape hangers for 2009 sportster custom
#2
probably not much......i got some straight bars on mine, but putting some 8" on this weekend, my hands are only going up about 4 inches compared to what i have, but no way my current cables will reach, my bars are in my sig pic, but these are my new ones..........ive measured and will have to get at least 3-5"'s on my cables
#3
I did 10in mini apes on my 09. I switched to a sportster low speedo mount and 1.5 in risers. I opted to extend the electrical wires because I internally wired them. I have stock throttle and clutch cables brake line I opted for an extended stainless one simply as a boost in braking performance.
#4
i got some 1.5 risers for mine also, but removing the stock riser my new bars would actually sit lower because the way they angle down and would have to relocate my speedo (not ready to do that just yet), so opted to keep stock riser and will need new cables. With the 1.5 risers no cable change needed on mine.
Thread
Thread Starter
Forum
Replies
Last Post