headlight issues
#2
If it's the same as my 2000, here's what you do.
1) _Carefully_ pop off the bolt covers with a screwdriver. These are just little caps which sit on top of two hex bolts. It takes very little force to get them off.
2) Remove the hex bolts, and the headlight cover.
3) Now you'll see a big bolt. Loosen, adjust the headlight aim, and tighten again. And, I'd recommend putting some locktite on that bolt.
DISCLAIMER: I'm no mechanic, but I did successfully adjust my headlight last week.
1) _Carefully_ pop off the bolt covers with a screwdriver. These are just little caps which sit on top of two hex bolts. It takes very little force to get them off.
2) Remove the hex bolts, and the headlight cover.
3) Now you'll see a big bolt. Loosen, adjust the headlight aim, and tighten again. And, I'd recommend putting some locktite on that bolt.
DISCLAIMER: I'm no mechanic, but I did successfully adjust my headlight last week.
Thread
Thread Starter
Forum
Replies
Last Post
gant
Dyna Glide Models
3
05-08-2013 07:56 PM