Sportster Models 883, 883 Custom, 1200 Custom, 883L, 1200L, 1200S, 1200 Roadster, XR1200, and the Nightster.
Sponsored by:
Sponsored by:

Sportster Mods - blinkers? cables? handle bars/riser? other ideas?

Thread Tools
 
Search this Thread
 
  #1  
Old 10-22-2009, 04:00 PM
stonewall308's Avatar
stonewall308
stonewall308 is offline
Tourer
Thread Starter
Join Date: Aug 2009
Posts: 275
Likes: 0
Received 0 Likes on 0 Posts
Default Sportster Mods - blinkers? cables? handle bars/riser? other ideas?

Hey all,

I just bought a 2007 Sportster XL1200C for my first bike. I just got my license, I've been riding around a bit and having a good time.

Two things I know I am going to do:
1. Vance and Hines short shots
2. New Seat and Sissy bar


I am also thinking about doing some things to make the bike look "cleaner." Does anyone have any ideas about what can be done with the blinkers? cables? I feel sure there is some good info on this, but I haven't been able to find it. Do all states require blinkers on motorcycles?

Also does anyone have any suggestions for wider/higher/more comfortable handle bars?

Also, has anyone changed the speedo and/or other instruments on their sportster? I am thinking about something a little smaller, maybe mounted lower. The gas light, oil light, etc. look fairly integral with the handlebar set up though.

Thanks!
 

Last edited by stonewall308; 10-22-2009 at 04:04 PM.
  #2  
Old 10-22-2009, 04:16 PM
DallasSportster's Avatar
DallasSportster
DallasSportster is offline
Road Captain
Join Date: Aug 2008
Posts: 589
Likes: 0
Received 0 Likes on 0 Posts
Default

You can find a ton of ideas by using the search function. The options for handlebars are limitless. If you search for "drag bars" or "apes" you will find more that enough info. Internally wiring the bars and relocating the blinkers cleans up the front end. There are also a lot of people that have relocated their speedometer. I decided to remove the reflectors on the rear fender and front forks. I also got rid of the huge stock taillight and replaced it with a low profile LED. My sig pic is a little older so my fork reflectors weren't off yet.
 
  #3  
Old 10-22-2009, 09:01 PM
gilmour68's Avatar
gilmour68
gilmour68 is offline
Road Master
Join Date: Oct 2006
Location: NE Pennsylvania
Posts: 1,167
Received 20 Likes on 15 Posts
Default

I'm in the process of doing just what you've mentioned. I've already ordered and received the HD parts used in Capttawes speedo relocation. However, I'm waiting on the V-Twin bracket that'll hold the speedo. It's on back order - hope it doesn't take too long to get here...

Still trying to decide between T-bars and mini-apes....
 

Last edited by gilmour68; 10-22-2009 at 10:25 PM.
  #4  
Old 10-24-2009, 12:00 PM
hogsport's Avatar
hogsport
hogsport is offline
Road Master
Join Date: Aug 2007
Location: Gahanna, OH
Posts: 1,060
Likes: 0
Received 0 Likes on 0 Posts
Default

Congrats on your Sporty,
You will like the Short Shots. Moving the front TS to the forks & removing the side reflectors (front & rear) are pretty easy.
 
  #5  
Old 11-05-2009, 10:42 PM
DaytonaSportster's Avatar
DaytonaSportster
DaytonaSportster is offline
Tourer
Join Date: Nov 2009
Location: Daytona Beach, FL
Posts: 381
Likes: 0
Received 1 Like on 1 Post
Default

I loved my drag bars on my past sporty. I had a '83 with 3.5 fatbob's and a custom belt final drive. It was the most comfortable ride.
My new to me '05 1200c is nice with the stock setup. I could not do a low rider or R model as I cant stand the spedo/tac out in front of the bars.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
drummer
Sportster Models
18
10-27-2011 11:31 PM
gilmour68
Sportster Models
4
01-30-2010 06:36 AM
Harleyduo
Sportster Models
7
09-08-2009 12:44 PM
BIGDADI
Sportster Models
2
07-01-2008 11:02 PM



Quick Reply: Sportster Mods - blinkers? cables? handle bars/riser? other ideas?



All times are GMT -5. The time now is 05:36 PM.