Hi all,

My RR stop/turn/running LED lamp has gone 'busted' and needs replacing. I can get the same lamp for £180 (single), but was wondering if i could do it cheaper by buying two slightly different, maybe not HD, ones.

As long as they're orange (conforming to EU regulations) and light up for running/turning/brake (4 wires?) then they're great! Any suggestions?


DRC'TNL LAMP ASY,RR/BLK,HDIProduct ID: 69360-08
part: 69360-08

Thanks!

 

I have the HD branded running/brake/turnsignal module. It's a simple plug and play. It retails for $60 USD here. So my guess, if they have them there, would be about £60 quid. You can retain the stock orange lenses. The lenses just pop on and off. Mine came with red lenses which I used. I still have the orange ones saved.

 

whadda you mean "gone busted"? is the bike fairly new what is it? i have a couple of these in a box doing nothing but at £180 i think i need to e-bay them or you could do this

 

Hey thanks for the replies. All i can find is this (69360-08) which i assume is the stock part and as i said is £180. Can you should be a page with the $60 one you brought?

The bike is an '09 nightster, but condensation got into one of the lamps causing the LEDs to fail. So i just need to replace one!

If you have a couple sat around, get them on ebay! They're £180 EACH! Let me know as soon as you do so i can bid, mates rates of course !

 

2009 Nightster factory lamps weren't LED so you have an aftermarket HD part, not stock.

 

Strange. I know the guy i got it from and he said he made no changes from new. However, the front indicators are bulbs.

Thinking about it, the LED ones i have act as turn/run/brake lamps, can this be achieved by a single bulb? As in the UK the indicators need to be amber and brake red?

Here is the part number: 68978-00 (£60)