Drag racing Pics, time sheets, vids
#2
12-09-2012, 02:01 PM
Cruiser
Join Date: Aug 2012
Location: In a van down by the river-MD
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
#7
12-09-2012, 04:50 PM
1992 xl 883. Bottom end, primary and secondary gearing all stock, stock lifters, rollers, suspension. Bike has a tach, drag bars and a front stap when I race.
Engine has buell heads ported with matching 1250 clylinder and piston kit. 575 chicken cams ,42 mikuni, Daytona twin tech ignition. Thunderheader or Sampson or pro stock pipe was on it this year. Energy one clutch as well as many passes on the factory clutch and spring. No bars, no air shift. Just over 220lbs suited at the track. Pump gas, 10.5 piston kit with a 9.1 to 1 corrected compression ratio with the chicken cams.
I'm looking to ditch the heavy azz rear wheel this winter and give a 45 mik a try.
And maybe some shocks that don't bottom out the first two feet at the track.
Engine has buell heads ported with matching 1250 clylinder and piston kit. 575 chicken cams ,42 mikuni, Daytona twin tech ignition. Thunderheader or Sampson or pro stock pipe was on it this year. Energy one clutch as well as many passes on the factory clutch and spring. No bars, no air shift. Just over 220lbs suited at the track. Pump gas, 10.5 piston kit with a 9.1 to 1 corrected compression ratio with the chicken cams.
I'm looking to ditch the heavy azz rear wheel this winter and give a 45 mik a try.
And maybe some shocks that don't bottom out the first two feet at the track.
