Mark this thread as Unsold
Gold valve emulator by race tech
#1
Gold valve emulator by race tech
$65 shipped to the lower 48. Used briefly in my 2010 XL1200X. Will fit any 39mm harley fork such as sportster or dyna. Comes with 3 sets of springs.
http://www.racetech.com/page/id/59
http://www.racetech.com/page/id/59
#3
Nothing really..they eliminated the horrendous brake dive. However I was trying to find a solution that would do that and give a more supple ride. This was my first experiment at improving the performance of the front forks on my 48.
At the time I used these there was no recommendation as to how large to make the holes in the dampening rod. I was cautious and only drilled them out to about 1/4 inch. There are a lot of different possible combinations. you have three different springs, and each of the springs can be tensioned differently as well.
This video was not out then. I can see they hog the hole out completely eliminating the dampening rods function. SO the problem was probably with me..but I did not know this at the time. I tried the Ricor intiminators next. The ricor intiminators will be for sale soon as I have moved on to a cartridge system..!!!
At the time I used these there was no recommendation as to how large to make the holes in the dampening rod. I was cautious and only drilled them out to about 1/4 inch. There are a lot of different possible combinations. you have three different springs, and each of the springs can be tensioned differently as well.
This video was not out then. I can see they hog the hole out completely eliminating the dampening rods function. SO the problem was probably with me..but I did not know this at the time. I tried the Ricor intiminators next. The ricor intiminators will be for sale soon as I have moved on to a cartridge system..!!!
Last edited by EL in NH; 10-26-2017 at 05:39 AM.
Thread
Thread Starter
Forum
Replies
Last Post
troop
Multi-Fit Parts and Accessories
1
10-19-2015 10:15 PM