Hello , my name is Omar, i live in Chile and i am trying to tune my bike

I have a Breakout CVO 2014 Orange , now has installed a Screaming Eagle Race Stage 3 with High Compression Pistons , Sport Cams , Pushrods, etc. more SE High flow original air filter more Vance and Hines Slip Ons 2,5"

I have a Diag4 tool and i copied complete map from supertuner program and tune in my bike but not work well in my opinion , at 2000 rpm sometimes hesitate ,and has low torque in low rpm

Supertuner Tune used 358SDT003.dt0
Application: 2012-2015 Softail/Dyna & 2016-2017 Dyna
Configuration: 1800 Stage 3
Components:
- SE Pro 110 Stage 3 kit
- SE or CVO Air Cleaner
- SE 10.5:1 High Compression Pistons
- Stock CVO Heads or SE Pro MVA Heads
- SE-259E Cams, Will also work with SE-251 Cams
- SE Exhaust
- ACR is ON


I copied each value and tune with diag4 in my bike , can you help me

 

I know it's the same motor as other Softails but I would post this in the Softail section under "The Everything Breakout Thread. You will probably get some answers."

 

You will need someone with Diag4 experience to offer some help, but as with most tuners, remember that base maps are just that ...a starting point.

Does the Diag4 have an auto tune feature that you can run to get it tuned in better?