The Dyno RoomA special room dedicated for Dyno tuning products, troubleshooting and results. All Gearheads and Dyno Operators are welcome here as well as the guys that are new to tuning. Please see the special rules for this section before posting.
A replacement battery can be found on Amazon. Replacing the battery is easy. If you do it fast enough while the other battery is good. You might not loose filmware. If you remove battery and loose filmware. It has to go to dynojet because I don't know of any other place that can download the filmware. Here is a PDF
There is no sending them back to dynojet after 01/01/2019 they do no more repairs now I'm going to get a battery and try it if I dont make it will just cost $2500 no big deal lol wish somebody had the firmware to be flasted
I have an old DynoJet 150 and would like to replace the battery in the hardware stack before it dies. I'd appreciate it if you could email the PDF file that you have for instructions on how to do it. I sent you an email.
when you remove the battery......before total disconnection at each terminal attach a jumper wire to a fully charged battery,, then remove from the battery you are replacing, keeping the jumpers in place, then re-attach new battery and remove jumpers. if done carefully, there should be no voltage loss and no firmware issues.
m