Pain in the ***
#1
Join Date: May 2009
Location: Calgary, Alberta, Canada
Posts: 120
Likes: 0
Received 1 Like
on
1 Post
Pain in the ***
Did an steering head bearing adjustment on my 2011 Road Glide on the weekend, followed the instructions in the service manual.....what a pain in the ***!!!!!!
If I ever have to do that again, it will be too soon.
After doing this, I would highly recommend NOT FOLLOWING THE SERVICE MANUAL.
The easy way to do in would be just removing the top fork brace (leaving the pinch bolts tight).
Good news is, I do not have the wobble on decal any more, and the swing is down to the spec'd 1.5, instead of the 6 changes in direction that it started with.
If I ever have to do that again, it will be too soon.
After doing this, I would highly recommend NOT FOLLOWING THE SERVICE MANUAL.
The easy way to do in would be just removing the top fork brace (leaving the pinch bolts tight).
Good news is, I do not have the wobble on decal any more, and the swing is down to the spec'd 1.5, instead of the 6 changes in direction that it started with.
Thread
Thread Starter
Forum
Replies
Last Post
Ohio HD Guy
2014-2023 Touring Models
19
03-15-2020 02:10 PM
silveroak
General Harley Davidson Chat
3
03-14-2011 08:50 AM