I would like to replace my rear lights and plate bracket on my 2010 Ultra Limited to one like this:



Not talking about the tail light - talking about mounting the license tag UNDER the tail light.

I can't find the right turn signal bar and/or license bracket to make this happen. Has anyone else done this?

The reason I want to do this is I want to install the quick disconnect for the tour pack and NOT have a giant license plate floating up into space above the tail light.

Thanks in advance!

 

Watching. Wanna do this myself.

2010 Limited with some stuff

 

Get the run/turn & brake light bar from a Street Glide.

 

A 2009 Street Glide will have exactly what you need, that's what I got the light setup from for my Eglide.

 

I'm running one off a Road King, tied the plate light into the tip light wiring.

 

I went with the bracket from softbrake and a laydown lens with a red LED bulb. The normal bulb is too close to the lens and will melt it

 

'09 streetglide for bullet lights or '09 standard and various '09up Roadkings for lollipops. I'm running Bullets on my standard...

 

THIS is what I want! Is there a specific year Road King?

And for the record, I'm looking for bullets, not lollipops.

 

It's possible to add a detatch kit and still have a reasonable looking license plate attatched to the hoop.

 

I got mine of a 07 road Glide then bought a light up frame and tied the wires into the tip light. I also I cut that towel bar thing of and got some lights at Oreillys and but them in the opening of where I cut it.
<a href="http://s175.photobucket.com/user/redjft/media/Mobile%20Uploads/_20150615_195250_zpsybghjsmx.jpg.html" target="_blank"><img src="http://i175.photobucket.com/albums/w157/redjft/Mobile%20Uploads/_20150615_195250_zpsybghjsmx.jpg" border="0" alt=" photo _20150615_195250_zpsybghjsmx.jpg"/></a>