1-1/4" Bars on 2005 Road King
 

I have a 2005 Road King with mini apes that are 1-1/4" but have the 1" center section in the clamp. I would really like to swap them out for a set of OEM 2015 Road Glide bars. Problem is the new Road Glide bars are 1-1/4" all the way through the center section. Does anyone know if I can swap the clamp over, or if there is a 1-1/4" clamp made for a 2005 bike?

You should be able to get a 1.25 riser take off from cvo road King or 15 RGS

HD makes 1.25" clamps for that bike. I'm running HD 1.25" Beach Bars and I got the replacement clamps and the chrome clamp cover from HD. They all came in a "Beach Bar Kit" but I'm sure they're available separately.

AFAIK bar spacing hasn't changed. The RG bars should bolt up if you remove the two bolts from the bottom of the riser and were to move everything over (which means OEM parts should fit if you need to change them).

I have a set of 1 1/4" risers off a 2013 Roadking that I am trying to sell.

https://www.hdforums.com/forum/multi...andlebars.html

You might want to give Wild 1 a call- they have proven to be very helpful in the past and I bet they either have what you need or could point you in the right direction.
Take a look:

http://www.wild1inc.com/acc_clamp.html