Alloy Art Strong Arm Inner Fairing
Hello All,
Today's project was re-installing my warranty repaired Aquatic AV headunit. I thought I'd do the Alloy Art fairing brackets as well. Tore everything down. Shook my head at the crappy wiring that has gone on since November 2008. One day I'm going to re do everything... One day. Fairing bracket wasn't terrible, just a bit of guess and test with the hardware, and alignment and such. I also ordered the secondary [?] brackets, but as I am using 5.25" -> 6.5" brackets with Infinity Kappas installed, there isn't any way to install the secondary brackets. [The brackets rotate the speakers 90 degrees] There is a part of me that thinks I should just install the 5.25" again, firm up the fairing, and call it done. However, others must have done something with their 6.5" install, and not "free-aired" the fairing. Maybe creative use of zip-ties? It was beer time a long time ago, so I shut the job down for the night. Anyhow, back in tomorrow, as I need to re-ground the amp, so any ideas would be helpful. I didn't take any pictures, but just curious what others have done on their installs. I still have the old HD HID headlight, and an aftermarket HID high beam. I'll need the bracket, as that supports the ballast. I will do a JW Speaker headlight at some point. Thanks H |
Your setup might be different than mine, but it all worked on for me. I used the Aquatic 6.5" speakers and their adapter.
https://cimg0.ibsrv.net/gimg/www.hdf...38c8909722.jpg |
Originally Posted by 702
(Post 17955082)
Your setup might be different than mine, but it all worked on for me. I used the Aquatic 6.5" speakers and their adapter.
I'm hoping to get a new headlight and get rid of the HID ballasts. Shoud clean up the wiring under the fairing a bit. I'll keep the secondary supports for later... Thanks H |
Originally Posted by FLHXHS
(Post 17956142)
How'd the amp and speakers turn out?
|
All times are GMT -5. The time now is 11:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands