Originally Posted by Vernal

Did you check for codes?

Originally Posted by AydensPapa

B2151 under the BCM
B2151 Left rear turn signal output open

Originally Posted by GalvTexGuy

Are all the lights stock on your bike? What I mean is, are there any other lights like saddlebag lights, keystone lights, etc?

Originally Posted by Vernal

I think I lead you down the wrong path checking the light bar. I have a side light from a 2012 so I tried testing it using continuity and it didn’t work. If your meter has the diode check function you can try that.

I’ll put up pictures of how to check with the diode function and you could try that but if nothing came on in the last test I think you proved the light is bad.

with the side light hooked up to the meter red to blue and black to black one led would come on. The meter must use V and current to check the diode. Also notice when in ohms the meter show O.L. Hooked up both ways

Originally Posted by AydensPapa

I removed the lightbar, in hopes to remove the lense to access the led's, no luck.

I again tried hooking it up to a battery, no lights.

I guess I'm forced to buy another light, try it and hope it works.

Originally Posted by Vernal

When you get the new light bar let us know how it looks

Bill

Originally Posted by AydensPapa

Got the lightbar from Ebay, It Works !!